2007منتدى Steadi-Newbies
اختيار وتشكيل جهاز (ستيادكام) لكاميرا سينما رقمية خفيفة الوزن
مضى على هذا 19 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
ملاحظة (حتى أكتوبر 2026)لم يعد كورت أو. شالر، مطوّر أنظمة Artemis وTrinity، يعمل لدى ARRI منذ نهاية عام 2025. على حد علمنا، لا يوجد لدى ARRI حاليًا فريق مخصص ولا جهات اتصال رسمية لأنظمة المثبّتات. نرى أن مستقبل هذا الخط غير مؤكد. إذا كنت تشتري جديدًا، فاحصل مسبقًا من ARRI على تأكيد مكتوب بمدة ضمان الخدمة وقطع الغيار. اطلب من الشركة المصنّعة فحص الأجهزة المستعملة قبل الشراء.
ما توصّل إليه النقاش
- A Flyer steadicam يُعتبر معدّات من الدرجة المهنية ذات ذقن أعلى، و gimbal جودة، وتسويات الذراع الخالية من الأدوات مقارنة ببدائل الميزانية مثل V20.
- The Flyer's 15-pound weight rating appears conservative and rigs in the 15-pound range can operate reliably.
- RedDrive storage devices can be mounted at the bottom of a Steadicam sled using handle bar mounts to improve weight distribution.
- Pulling focus manually on a camera with a full-frame sensor at wide apertures is extremely difficult and requires skill beyond what automatic focus systems or assist features can provide.
- The RED camera is a suitable weight and shape for Steadicam operation and most decent rigs can successfully fly it.
- Taking a professional Steadicam workshop is recommended before selecting a rig, as it helps determine the best equipment for individual circumstances and budget.
- Carbon fiber 15mm support rods were becoming available in lengths up to 24 inches.
- Petroff modular matteboxes offer lightweight, tool-free construction with a two-stage 4x4 configuration weighing approximately 1.5 pounds.
- A base Flyer with AB mounts was available for around 6000 dollars at the time.
- Attaching a high-resolution external monitor is necessary for accurate focus pulling in low depth-of-field situations, with daylight-viewable HD monitors being significantly more expensive than standard HD monitors.
- Having both Steadicam and handheld shoulder mount capabilities provides flexibility for different shot types and production situations.
يعتمد على
- The discussion occurred in 2007 regarding camera equipment specifications and pricing that are now outdated.
- Specific weight claims for unreleased camera components and accessories were estimates rather than confirmed specifications.
- The weight capacity discussion assumes the Flyer's stated 15-pound limit may be conservative but does not provide definitive overload specifications.
- One suggestion to mount an electronic viewfinder as a head-mounted device was noted as a concept that had been tested and abandoned decades earlier due to disorientation issues.
المعدات في هذا النقاش
القطع
المعدات أو القطع نفسها
- 2026(أ) الانتقاء بين رفع مستوى مجموعة مواد بروفيد-2 القديمة أو الاستثمار في جهاز مهني: النهج الأول لحلقة العمل مقابل النهج الأول للمبتدئين في المعدات.موضع خلافFacebookSteadicam operators group
- 2026لِماذا a 150 Wh بطارية في sled يَقُودُ آلةَ التصوير لفقط -20 دقيقةِ مقابل إثنان إلى ثلاث مراتِ أطولِ عندما صُمّمتْ على الجسمِ، و كَيفَ يُمْدّدُ الجرّارَ.موضع خلافFacebookThe Steadicam Group
- 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
- 2026وتباينات في عرض التذبذبات بين الكاميرات والحزب الجمهوري الماوي في ARRI Artemis Trinity 2: 24 في السكك الحديدية تظهر 23.4 في الفرنكوفونية مقابل 28 في المائة في الكاميرا.موضع خلافFacebookArri Artemis Trinity