SteadiHub
2010منتدى Cameras (Film/Video/HD)

تطابق الكابلات الكهربائية والتحكمية لـ Arri كاميرة أليكسا في Steadicam جهازا

مضى على هذا 16 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.

ما توصّل إليه النقاش

  • الـ 24 فولت الـ Arri كاميرا القياسية و الكابلات الجاهزة تعمل مباشرة مع اليكسا دون الحاجة إلى كابلات جديدة أو خاصة.
  • The Alexa accepts both 12-volt and 24-volt input power and automatically upconverts 12-volt to 24-volt internally.
  • وهناك ثلاثة أنواع مختلفة من المعقوفتين متاحة للأليكسا: V-mount، وصحن الجسر، وجهاز التكييف المسطح في قاع البحار، يؤثر كل منها على كيفية ارتفاع الموصلات.
  • كابل طاقة خارجي من صندوق الزلازل المزدحمة إلى موصل الأنثوية P-tap يسمح بدخول الكهرباء من خلال جهاز الحفرة بدلاً من اشتراط طاقة بطارية على متن كل جهاز.
  • قاع كاميرا اليكسا لديه مساحة سطحية مسطحة كافية بالقرب من الجبهة للسماح بالارتفاع المباشر لـ dovetail لوحة دون أن يتطلب مكيّفاً.
  • The camera performed reliably in temperatures as low as minus 20 degrees Celsius and withstood accidental impact without malfunction.
  • Recording to onboard memory cards eliminates the need for external recording cables and fiber connections in many Steadicam configurations.
  • A right-angle Fischer connector can be used for the 2-pin power connector to prevent interference with other equipment like external recorders.
  • The camera defaults to recording right-side-up, requiring either a low-mode plate or post-production image flipping to achieve inverted recording for low mounting positions.

يعتمد على

  • Low-mode plates were rare at the time of these posts; later firmware updates added image-inversion capability to address this limitation.
  • An external HD monitor or downconverter is required since the camera has no built-in downconverter.
  • One user reported that their Anton Bauer plate lacked a P-tap outlet, necessitating an adapter plate sandwiched between battery and mount.
  • The camera upconverting 12-volt to 24-volt for RS connector power was stated as an assumption rather than confirmed specification.
  • Software updates released frequently during early production use, creating potential compatibility and workflow changes mid-project.

القطع

Low Mode

المعدات أو القطع نفسها

  1. 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
  2. 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
  3. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rodmounts and CamJam mounts to minimize vibrationsموضع خلافSteadiHub
  4. 2026Low mode وقلب الصورة: ما التحقق من الكاميرا قبل اليومOperator practice
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف