SteadiHub
2012منتدى Steadi-Newbies

Maximum camera weight capacity for the Steadicam Pilot and how to interpret the 10 lb payload specification

مضى على هذا 14 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.

موضع خلافاختلف المشاركون ولم يصلوا إلى خلاصة. اقرأ النتائج على أنها مواقف، لا إجابة.

ما توصّل إليه النقاش

  • The Pilot is specified for cameras weighing 2 to 10 pounds according to Steadicam literature
  • Tiffen's weight specification for the Pilot refers to the total camera payload weight, not just the camera body alone
  • Weight added to the bottom of the sled beyond what Tiffen includes in their standard configuration counts toward the total payload limit
  • Accessories mounted on the camera such as monitors, transmitters, and microphone receivers consume part of the available payload capacity
  • When the payload limit is exceeded, the operator's arm must provide additional lift rather than relying on the rig's springs
  • A heavier camera requires more counterbalance weight below the gimbal, which affects how much additional weight can be added to the bottom of the sled
  • The Pilot specifications may be unclear about which components are included in the weight calculations

يعتمد على

  • This discussion concerns a 2012-era Sony EX3 camera paired with a Pilot rig, which may not represent current equipment
  • Participants disagreed about whether weights below the gimbal count toward the payload limit, leaving the specification interpretation unresolved
  • Manufacturer documentation was noted as confusing and inconsistent compared to other Steadicam models
  • The accuracy of Tiffen's specifications for individual setups with varying configurations and accessories was questioned
  • The relationship between camera weight position above the gimbal and required counterweight balance was discussed theoretically but not conclusively tested

المعدات في هذا النقاش

G-70الكتالوج

المعدات أو القطع نفسها

  1. 2023تقييم الأداء والقيمة لنظم تثبيت المفاعلاتGeneral Discussion
  2. 2023معدات الدعم والمعدات الاحتياطية لـ Steadicam® مشغلا: القائمة ذات الأولوية واعتبارات الميزانيةFacebookSteadicam operators group
  3. 2023شنق Tiffen و G50X ذراعاً على مركب رصيفي بدون رصينة؛ مدى توافر arm posts أطول.FacebookThe Steadicam Group
  4. 2022(ب) طول أجزاء الذراع (المركز الأول إلى المركز المحوري) في برنامج برو، Tiffen، Xarm، ونماذج NB: ما إذا كان نطاق الازدهار الأكبر مستمداً من أجزاء أطول أو زوايا افتتاحية أوسع.FacebookThe Steadicam Group
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف