2013منتدى General Discussion
خيارات تحقيق الاستقرار الميسورة للانتقال بين طلقات الذروة المنخفضة والطبيعية على متن مركبة من طراز Steadicam بدون نظم آلية
مضى على هذا 13 سنة. قد تكون المعدات والأسعار قد تغيّرت منذ ذلك الحين.
موضع خلافاختلف المشاركون ولم يصلوا إلى خلاصة. اقرأ النتائج على أنها مواقف، لا إجابة.
ما توصّل إليه النقاش
- وقد يعمل جهاز ثوري يدوي بمساعدة الجاذبية وغيروس داخلي من أجل الانتقال البطيء بين الطول المنخفض والمتوسط، على الرغم من أنه قد لا يحافظ على مستوى مثالي في جميع مراحل التحرك.
- إن نظام تانغو متوافق مع أجهزة الحفر الشبحية، ولكن لديه قدرة محدودة على الوزن مقارنة بالنظم الأكبر حجما.
- والسير في منحدر بينما في عام low mode هو تقنية عملية تظهر في العمل المهني إلى الانتقال من مواقع كاميرا منخفضة إلى أعلى بدون معدات متخصّصة من طراز gyro.
- An EasyRig setup with gyros can work for stationary or hands-free situations but is not recommended for crouching and moving shots requiring stability.
- Using a Garfield mount on a Fisher 11 dolly with a camera riser can provide a gradual height transition though it will not reach as high as a full ramp solution.
- A Mini Techno Crane is another alternative option for achieving low-to-high transitions.
- Flipping or inverting the rig mid-take is technically possible but not a professional approach to achieving the intended shot.
- Buddycam is mentioned as a system capable of booming rapidly and panning at various heights.
يعتمد على
- Attempting to use gyros inside a Manual Revolution to maintain level throughout a full low-to-high transition may result in the rig being tilted at the top of the move.
- The approaches discussed are not equivalent to a dedicated Alien Revolution or Omega Revolution system, which are purpose-built for these transitions.
- Expertise and proper equipment design matter significantly for achieving clean, professional results with these types of shots.
القطع
المعدات أو القطع نفسها
- 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
- 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
- 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rodmounts and CamJam mounts to minimize vibrationsموضع خلافSteadiHub
- 2026Low mode وقلب الصورة: ما التحقق من الكاميرا قبل اليومOperator practice