ما توصّل إليه النقاش

• The Archer 1 uses an older design with limited ability to achieve dynamic balance, while the Archer 2 features improved design for better balance adjustment.
• The Archer 1 has a fixed monitor position that cannot be moved spiritually or horizontally on the yoke, whereas the Archer 2 allows monitor repositioning.
• وقد تم تحديد موقع البطاريات البالغ Archer 1 وتم تحديده إلى حد بعيد بالنسبة لمعظم المشغلين، مما يتطلب إضافة وزن خارجي لتحقيق توازن دينامي.
• The Archer 2 features a collapsible base for improved portability, which the Archer 1 does not have.
• The Archer 2 comes in three formations: standard with G-40 arm, S version with G-50 arm and single-axis motorized stage, and SE version with G-50 arm and dual-axis motorized stage.
• The Archer 1 can handle SDI or component HD video signals.
• The Archer 2 battery can tilt and move in and out of the yoke, allowing better weight distribution for balance.
• Neither Archer model includes a built-in artificial horizon.
• The Archer 2 has been available only with the G-50 arm since NAB, with the G-40 configuration discontinued.

يعتمد على

• One operator reports needing to add weight to the Archer 2 base to achieve sufficient mass for desired post length.
• The information about video signal compatibility and current arm availability is based on sources that may have changed.
• Specific power port differences between models are mentioned as possibility but not confirmed.
• Balance modifications described represent individual solutions rather than factory specifications.

القطع

Low Mode

المعدات أو القطع نفسها

1. 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
2. 2026Low-mode رصد الاختيار من أجل Volt جهاز حفر الدماغ: أداء الطوارئ البالغ Transvideo Starlite مقابل البدائل الحالية.موضع خلافFacebookThe Steadicam Group
3. 2026Rig setup for 180-degree immersive camera operation with Blackmagic URSA Cine Immersive: minimizing rig and monitor visibility in ultra-wide field of view.FacebookThe Steadicam Group
4. 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group