SteadiHub
2015منتدى Sled

مواصفات قياس الموقع للكاميرا Archer2 sled

ما توصّل إليه النقاش

  • The Archer2 sled has a nominal post diameter of 1.5 inches.
  • وستتناسب مقابس قياسية تبلغ 1.5 بوصة وتعمل على نحو سليم في الوظيفة Archer2، على الرغم من أن الأبعاد الفعلية قد تختلف اختلافا طفيفا من 1.500 بوصة بالضبط.
  • ويحتفظ المركز الأعلى للرقم Archer2 بقياسات ثابتة لمقياس قطرها حوالي 1.5 بوصة.
  • أما الوظيفة القاعية من الـ Archer2، فتتراوح مقاسها مع قياسات تتراوح بين 1.37 و 1.38 بوصة عبر نقاط متعددة.
  • وفيما يتعلق بالتطبيقات غير الحرجة، فإن طوقاً أو مشبكاً يبلغ طوله 1.5 بوصة مناسب للرسو في وضع منخفض على مقطورة آرتشر 2.
  • وعندما تكون القياسات الدقيقة حاسمة، يوصى بالاتصال المباشر مع الصانع بدلا من الاعتماد على المواصفات الاسمية.

يعتمد على

  • The bottom post diameter shows measurable variance, suggesting manufacturing tolerance or wear variation.
  • Measurements using calipers on the bottom post produced slightly different results across multiple attempts, indicating either measurement technique difficulty or actual variance in post diameter.
  • The specifications appear to be nominal rather than exact, with actual dimensions potentially differing from the stated 1.5 inch specification.
  • One user reported that actual measurements were not precisely 1.500 inches despite the nominal specification.

القطع

Low Mode

المعدات أو القطع نفسها

  1. 2026Vest قطرة: ما الذي يُخفّض جورب الذراع يشتريه فعلاً، وما يُكلّف على القمةOperator practice
  2. 2026Lemo connectors on the ARRI Artemis sled: fatout, polarity verification, and powering low-mode monitors and Volt bat.FacebookSteadicam operators group
  3. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rodmounts and CamJam mounts to minimize vibrationsموضع خلافSteadiHub
  4. 2026Low mode وقلب الصورة: ما التحقق من الكاميرا قبل اليومOperator practice
اقرأ النقاش الأصلياسأل عن هذا النقاشالإجابة تستشهد بالأرشيف