Was die Diskussion ergab

• The top stage of the Flyer LE features a 3-pin FGG.0B.303 LEMO female connector for power and a BNC connector for video
• Standard new Flyer LE rigs include a power cable converting from 3-pin LEMO to 4-pin XLR, though conversion from 4-pin XLR alone is sometimes simpler
• The Flyer LE lacks power and video connections at the bottom of the post, which causes weight distribution problems and limits accessory placement
• Potential custom solution involves tapping into the monitor cable multi-core with an 8-pin PRO LEMO breakout box to provide video and power outputs on the lower spar while maintaining stock compatibility
• Operating RED cameras on a Flyer LE typically requires a remote follow focus unit and additional power cables to support video assist and wireless systems

Hängt ab von

• No images of the connectors were provided to verify appearance
• The custom breakout box solution was still in development at the time of discussion and may not have been completed
• Upgrading to larger rigs was noted as an alternative but falls outside the budget considerations mentioned

Bauteile

Top Stage, Follow Focus

Dieselben Geräte oder Bauteile

1. 2026Upgrade eines älteren Steadicam® MK-V mit 1,5-Zoll-Ständer auf Volt-Konfiguration oder Wechsel auf den neuen Steadicam® Elite (1,25-Zoll-Ständer, 14 kg).FacebookThe Steadicam Group
2. 2026Empfohlene Upgrade-Prioritäten für ein GPI Pro steadicam-RigSteadi-Newbies
3. 2026Wechseln der Kamera zwischen Stativ und Rig: das billigste Upgrade, das die meisten Betreiber nie machenOperator practice
4. 2026Transvideo hat den handel eingestellt: was besitzer ihrer monitore wissen müssenOperator practice