2008Forum Vehicles and Mounts
Windschutzlösungen für Frontkamera-Anlagen an Fahrzeugen
18 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Ein Plexiglas-V-förmiger Schild, der hinter dem Kamerabediener positioniert ist, kann Windkräfte bei Hochgeschwindigkeitsfahrzeugaufnahmen ablenken, ähnlich wie bei Techniken, die bei Flaggenanordnungen verwendet werden.
- Vehicle mount work at moderate speeds around 40-50 km/h produces manageable wind and camera shake conditions.
- Climbing harnesses with proper tie-in points provide secure positioning for operators on front-mounted rigs and prevent ejection during accidents.
- Safety harnesses must be designed so that if the operator falls, they cannot be dragged by their harness—positioning loops alone are insufficient for fall arrest.
- Climbing daisy chain devices are designed for positioning only and may not reliably stop a fall, unlike harnesses where each loop is rated for full fall arrest forces.
Hängt ab von
- The V-shield approach requires engineering for high speeds and cannot be improvised last-minute.
- Wind deflection solutions were discussed but not definitively tested or validated in the thread.
- Discussion focuses on operator safety harnesses rather than complete equipment specifications.
- Shooting took place in Morocco at 40-50 km/h, which may not represent all operational conditions.