2010Forum Cameras (Film/Video/HD)
Montage- und Konfigurationsoptionen für Arri 416 Plus Kamera auf Steadicam
16 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Der Kamerakörper hat ein einzelnes 3/8-Zoll-16-Schraubenloch an der Unterseite, hat aber auch Aufnahmestiftlöcher für zusätzliche Montageoptionen.
- Wenn die Bordbatterie der Kamera während des Steadicam-Betriebs montiert bleibt, bleibt die Batterie des Gimbal-Opers erhalten, während das Kameragewicht für den Steadicam-Einsatz unter 20 Pfund mit einem Hauptobjektiv und voller Einrichtung geeignet bleibt.
- Der Zubehörträger kann entfernt und der Kamerakörper direkt an einer Steadicam-Grundplatte montiert werden, wenn er den leichten Haltebügel verwendet, obwohl eine handelsübliche steadicam-Adapterplatte die Oberflächen für eine sichere Montage richtig ausgerichtet hält.
- The two-piece bridge plate design allows quick-release disconnection from handheld operations by removing only the rod assembly while keeping matte box and follow focus attached.
- A spare baseplate is the minimum additional equipment needed to enable quick switching between Steadicam and handheld configurations without requiring a spare sled or bridge plate.
- The low mode bracket consists of two parts: a standard low mode bracket mounted to the camera and an upper handle section with spacers that keeps the Steadicam plate permanently attached while allowing the camera to flip for low mode operation.
- Powering auxiliary equipment like a wireless video receiver from the camera's mini-monitor connector uses a single cable and works effectively without complications.
- The lightweight support bracket with 15mm rod openings creates an uneven bottom surface that prevents direct baseplate mounting unless a dedicated Steadicam adapter plate is used to level the mounting surface.
Hängt ab von
- Discussion includes some disagreement about specific terminology and mounting configurations that may be rental house specific.
- Not all rental houses may stock spare parts like additional baseplates, bridge plates, or sleds that enable the fastest configuration changes.
- The Steadicam adapter plate mentioned is a commercial third-party accessory from a German manufacturer, not standard Arri equipment.
- Experience shared is primarily from film production contexts rather than other camera types.
Geräte in dieser Diskussion
Bauteile
Dieselben Geräte oder Bauteile
- 2026Weste tropfen: was das absenken der armbuchse tatsächlich kauft und was es oben kostetOperator practice
- 2026Lemo-Anschlüsse am ARRI Artemis Sled: Pinout, Polaritätsprüfung und Stromversorgung von Low-Mode Monitoren und Volt Batterie.FacebookSteadicam operators group
- 2026Wechseln der Kamera zwischen Stativ und Rig: das billigste Upgrade, das die meisten Betreiber nie machenOperator practice
- 2026Fokussieren und Zoomen Sie sich während des Betriebs, insbesondere bei Live-ShowsOperator practice