2013Forum General Discussion
Verbinden einer Nikon D800 Kamera mit einem Pilot Monitor mit HDMI zu RCA Konvertierung
13 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Ein Mini-HDMI-RCA-Konverter kann eine Nikon D800 an einen Pilot-Monitor anschließen, wobei Budgetoptionen wie der eSynic-Konverter zuverlässig funktionieren.
- Der eSynic-Wandler kann ohne externe Stromversorgung arbeiten, wenn er an den D800 angeschlossen ist und direkt vom HDMI-Anschluss Strom bezieht.
- The D800 outputs 1080p at 25fps during live view but switches to 720p at 50fps during video recording, causing temporary screen flickering when starting or stopping recording.
- The HDMI resolution menu settings on the D800 only affect playback of recorded content, not live view output.
- A defective HDMI cable can cause unexpected format conversion issues that may incorrectly suggest the converter is faulty.
- Multiple power-up cycles of live view may be necessary to establish stable HDMI handshake between the D800 and converter.
- Disabling the live view information overlay on the D800 provides a full-screen image on the monitor, while enabling it shows a smaller framed image.
Hängt ab von
- Only tested with the Nikon D800 specifically.
- The HDMI handshake issue appears to be a quirk of the D800 or the converter, not definitively attributed to either device.
- Some users opted for alternative solutions like replacing the monitor entirely rather than using a converter.
- One user mentioned initial format handling confusion that turned out to be cable-related, suggesting troubleshooting can be complex.