SteadiHub
2014Forum General Discussion

Latenzprobleme bei der Überwachung von RED Epic-Aufnahmen in 5K und 4K

12 Jahre alt. Geräte und Preise können sich seitdem geändert haben.

Was die Diskussion ergab

  • RED Epic Kameras führen etwa 2-3 Millisekunden inhärente Latenz bei der Verarbeitung und Ausgabe von Videosignalen ein.
  • Zusätzliche Latenz von 1-2ms kann durch das Monitoring-Display selbst eingeführt werden.
  • Externe Videoverarbeitungsgeräte und VTRs können der Signalkette weitere 1-2 ms Verzögerung hinzufügen.
  • The cumulative latency from camera through monitoring chain typically reaches 4-5 milliseconds, which is perceptible to viewers and operators.
  • The latency stems from the requirement to de-bayer and process the high-resolution 5K data stream down to 1080p 4:2:2 output for monitoring.
  • Synchronizing audio delay to match video delay can partially mitigate the problem on larger productions with separate audio monitoring.
  • On smaller productions with live audio monitoring, audio-video synchronization workarounds are not practical.

Hängt ab von

  • The latency issue affects both 5K and 4K monitoring workflows.
  • The workaround of delaying audio requires separate audio monitoring infrastructure.
  • This discussion is from 2014 and may not reflect current firmware or monitoring solutions.
  • The exact latency figures are based on field observations and testing rather than official specifications.
Originaldiskussion lesenFrage zu dieser DiskussionDie Antwort nennt ihre Quellen