2024Forum Steadi-Newbies
Restaurierung und Modifikation eines gebrauchten Steadicam Flyer inklusive Power System Redesign, Display Upgrade und kundenspezifische Sled Komponenten
Was die Diskussion ergab
- Ein Jahrgang Steadicam Flyer kann für ungefähr die Hälfte des neuen Verkaufspreises gekauft und durch Komponentenaustausch und kundenspezifische Änderungen in den Arbeitszustand versetzt werden.
- Steadicam Westen und tragetaschen können effektiv gereinigt werden, indem schaumstoffkissen zerlegt und die nylonbezüge separat mit gewebesicheren desinfektions- und handwaschtechniken gewaschen werden.
- Ryobi 18V Elektrowerkzeugbatterien bieten den besten Wert pro Wattstunde für die Stromversorgung eines Steadicam-Rigs und verfügen über eine integrierte Spannungsschutzschaltung, die im Gegensatz zu einigen konkurrierenden Systemen eine Überladung verhindert.
- LM2596-based DC-to-DC converter boards can step down 18V power to stable output voltages needed for various components but are limited to approximately 3 amperes of current.
- Micro HDMI cables can be threaded through the narrow diameter post of a Flyer sled where standard HDMI connectors cannot fit, allowing connection of modern HD monitors.
- A Lilliput A7S 7-inch monitor with 1920x1200 resolution and variable DC voltage input can replace the original SD analog monitor on a Flyer while maintaining standard 1/4" 20 mounting compatibility.
- Wireless video transmitters operating on 5GHz can experience interference with Wi-Fi based robot control systems when used in the same venue, requiring manual channel adjustment.
- Custom 3D-printed adapters and brackets designed in CAD software can interface modern components like 15mm cinema rods and power tool batteries with vintage Steadicam equipment.
- Operating a Steadicam rig requires a C-stand for setup and balancing rather than tripods or alternative support methods.
- Incorrect tuning of the socket block threads causes the sled to drift and move unexpectedly during operation.
- Shear-Loc brand thumbscrews in 1/4" 20 thread size are suitable replacements for broken Flyer vest fasteners.
Hängt ab von
- The restoration project spanned approximately two years and required specialized knowledge of mechanical design and 3D printing.
- The user had minimal prior hands-on experience operating a Steadicam before attempting these modifications.
- The battery system was tested in limited live operation at sporting events with specific wireless transmission equipment.
- The initial sled post mounting block design cracked under operational stress due to insufficient undercut design in the collar area.
- Power delivery through the LM2596 converter is limited to 3 amperes which may prove inadequate for powering multiple high-current devices simultaneously.
- HDMI signal pass-through using a monitor's loop output reduced resolution from the desired 1920x1080x60i to 720x480.
- The custom pedestal clamping design for mounting accessories to cinema rods does not provide adequate clamping pressure according to the builder.