2011Forum Steadi-Newbies
Auswahl und Anschluss eines externen Monitors an ein Flyer-LE Steadicam-Rig zur Überprüfung der Exposition während der Produktion
15 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
UmstrittenDie Beteiligten waren sich nicht einig. Lies die Befunde als Positionen, nicht als Antwort.
Was die Diskussion ergab
- Der LCD-Monitor einer Kamera, die auf einer Steadicam montiert ist, kann nach außen gedreht werden, um die Belichtung mit Zebras zwischen den Aufnahmen zu überprüfen, ohne dass eine separate externe Ausrüstung erforderlich ist.
- Marshall 7-Zoll-Monitore mit HD-SDI-Anschlüssen und False Color Mode bieten eine hellere, schärfere Alternative zu Standard-Steadicam-Monitoren für unter 1100 US-Dollar, was sie für den Einsatz auf Sled praktisch macht.
- Monitors equipped with vector scope and waveform display capabilities cost significantly more than basic monitors but provide more reliable exposure information than simple LCD displays.
- Connecting an external monitor to a Flyer sled often requires custom adapter cables costing $75-100 for video signal and power connections.
- The EX3 camera can send composite video output that can be routed to external monitors via adapters and jumper cables connected to an operator's vest to minimize cable influence on sled balance.
- A director checking iris settings from the on-board camera monitor or by looking over the operator's shoulder eliminates the need for additional external monitoring equipment on set.
Hängt ab von
- The discussion covers a specific low-budget production setup with limited crew and particular lighting challenges that may not apply to all Steadicam operations.
- Recommendations for monitor specifications depend on knowing the camera model and its available video outputs.
- The weight and balance implications of mounting heavier monitors like the Cinetronic on a Flyer are mentioned but not fully detailed.
- Some participants disagreed about the necessity and practical value of having exposure monitoring capabilities on a Steadicam monitor during production.
Geräte in dieser Diskussion
Dieselben Geräte oder Bauteile
- 2026Steadicam® A-30 Unterarmsegment Steifigkeit und Quietschen nach Garantie Service; Lagerring Kontakt Hypothese.FacebookSteadicam operators group
- 2026Reduzierung des Spannungsabfalls bei der Standardverkabelung Steadicam® Zephyr für Hochleistungs-Broadcast-Kameras.UmstrittenFacebookSteadicam operators group
- 2026Erster Stabilisatorkauf: Steadicam® Elite (14 kg Nutzlast, integriert Volt 3) gegenüber Rever Evo (höhere Nutzlast) und Gebrauchtmarktstrategie.UmstrittenFacebookThe Steadicam Group
- 2026Entfernen eines stecken gebliebenen Flugzeugsteckers aus einem gebrauchten Steadicam® Zephyr Armverbindungsblock und Rekonfigurieren in den Goofy-ModusFacebookSteadicam operators group