2009Forum Cameras (Film/Video/HD)
Varricam 3700 Kamera-Setup und operative Überlegungen für steadicam Arbeit
17 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Der Varricam 3700 verfügt über eine Reverse-Scan-Funktion, mit der der Sled als Alternative zur herkömmlichen Low-Mode-Montage auf den Kopf gestellt werden kann.
- Die Kamera enthält einen internen Downconverter, wodurch externe Downconversion-Geräte entfallen.
- Der stromverbrauch beträgt etwa 38 watt allein für das kameragehäuse und ist damit mit standard-steadicam-stromlösungen wie dionic- oder clipper-batterien kompatibel.
- Der Kamerakörper wiegt 10,8 Pfund, wobei das Objektiv und der Sucher etwa 6,2 Pfund für insgesamt 17 Pfund hinzufügen.
- Der Stromanschluss verwendet einen 4-Pin-XLR-Anschluss an der Rückseite des Körpers.
- The camera can record 1080p video at 4:2:2 using the AVC-I codec directly to onboard P2 cards, eliminating the need for cable infrastructure when used with wireless transmission.
- When using wireless transmission instead of cabled output, the setup becomes more portable and operational flexibility increases.
- The camera may remain powered even when the sled power is switched off, requiring manual power shutdown at the camera itself.
- Modified sled setups can draw camera power simultaneously from all three sled batteries for improved performance with HD cameras.
- The combination of the camera body with a 6-24mm zoom lens and digi-prime lenses proved to be significantly lighter than comparable film camera rigs.
Hängt ab von
- The experience and observations are based on the Varricam 3000 and 3700, which share identical or nearly identical specifications.
- Low-mode mounting stability when using a bracket on the handle was not definitively confirmed and requires testing in actual production conditions.
- The specific performance of the internal downconverter with the mentioned monitor and sled configuration is based on limited testing.
- Power delivery modifications were custom-made to the specific operator's sled and may not be standard across all setups.
Bauteile
Dieselben Geräte oder Bauteile
- 2026Weste tropfen: was das absenken der armbuchse tatsächlich kauft und was es oben kostetOperator practice
- 2026Lemo-Anschlüsse am ARRI Artemis Sled: Pinout, Polaritätsprüfung und Stromversorgung von Low-Mode Monitoren und Volt Batterie.FacebookSteadicam operators group
- 2026Montage des Gehirns TIFFEN Volt: Vergleich der Steifigkeit zwischen ARRI Stangenhalterungen und CamJam-Halterungen zur Minimierung von VibrationenUmstrittenSteadiHub
- 2026Low Mode und das bild umdrehen: was sie vor dem tag auf der kamera überprüfen solltenOperator practice