2011Forum Sled
Steadicam Optionen für Canon 5D ohne Zubehör für persönliche Filmprojekte
15 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Die Steadicam Merlin ohne Arm und Weste eignet sich zum Balancieren einer Canon 5D für reibungslose Handaufnahmen.
- The center of gravity for a DSLR with short zoom or prime lens typically falls in the air space approximately half to three-quarters inch along the lens barrel from its mount point, positioned between the lens barrel edge and inner pistol grip edge.
- Mounting the camera on hole O of the Merlin plate provides a good starting point for DSLR balance.
- Starter weight configurations exist for specific camera and lens combinations, such as the Canon 5D Mark II with 24-105mm lens using 1 mid and 1 finish nose weight plus 3 mid and 1 finish bottom weights.
- The Merlin stage offers sufficient side-to-side and fore-and-aft adjustment to achieve proper balance without removing the mounting plate.
- Zooming in or out on a lens significantly changes the center of gravity and requires fore-and-aft trim adjustment during operation.
- Glidecam produces similar stabilizer gear at lower price points, though Tiffen products are noted for higher quality at that price range.
- External accessories like small monitors mounted on the camera body can help widen the mass distribution to improve stabilization.
Hängt ab von
- Starter settings and guidelines are specific to particular camera body and lens combinations and serve only as a starting point.
- Guidelines do not apply when accessories like lights, clip-on mattebox, or external power bases are mounted on the camera.
- A perfectly balanced rig cannot be achieved by following guidelines alone and requires fine-tuning with balance adjustment controls.
- Heavier cameras like the Sony EX1 did not perform well on the Merlin according to user experience.
- The information is from 2011 and may not reflect current steadicam technology or DSLR designs.