2011Forum General Discussion
Umwandlung eines Universalmodells 1 Steadicam in Low Mode
15 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Das Modell 1 kann in Low Mode umgewandelt werden, indem der Mittelpfosten und die vordere Stütze aufgeklappt werden und dann die Basis umgekehrt wird, um sie rechts oben zu halten.
- Ein alternativer Low Mode-Ansatz beinhaltet das Invertieren des gesamten Sled und die Verwendung eines kleinen Spiegels, der auf das Gerät geklebt ist, um das Bild nach oben in die Sicht des Bedieners zu reflektieren.
- Bei der Spiegelmethode müssen Scan-Umkehrschalter installiert werden, um die Bildausrichtung im Monitor zu korrigieren.
- Some Model 1 units were modified with an adapter allowing the monitor to be mounted at an angle to the front post for low mode visibility.
- Adding an external LCD monitor on an adjustable arm improves low mode visibility compared to built-in monitor solutions.
- The Model 1 was designed to be front-heavy, so adding an external monitor requires adding compensating weight to the back end to maintain proper balance.
- A lightweight seven-inch LCD monitor can be mounted on a magic arm, though this will throw the sled out of dynamic balance requiring back-end weight compensation.
Hängt ab von
- The front-heavy design of the Model 1 means any monitor modifications will require rebalancing.
- View angles with inverted mounting solutions can be problematic when the sled is boomed up while shooting downward.
- No complete set of original Model 1 low mode conversion instructions appears to have been readily available.
- The conversation references modifications performed by specific individuals but lacks complete technical specifications for implementing them.
- One participant describes personal difficulties using these solutions, including awkward viewing angles requiring neck strain.
Bauteile
Dieselben Geräte oder Bauteile
- 2026Lemo-Anschlüsse am ARRI Artemis Sled: Pinout, Polaritätsprüfung und Stromversorgung von Low-Mode Monitoren und Volt Batterie.FacebookSteadicam operators group
- 2026Finding a bright (1500–2000 nits) low-mode monitor with recording and SDI I/O to replace a defective Transvideo Starlite.UmstrittenFacebookSteadicam operators group
- 2026Die Wahl zwischen Wave, Volt 2 und MK-V Level Gimbals: Leistung bei Wind, Riggewicht, Wartung und Modenumschaltung.UmstrittenFacebookSteadicam operators group
- 2026Weste tropfen: was das absenken der armbuchse tatsächlich kauft und was es oben kostetOperator practice