2005Forum Steadi-Newbies
Verwendung eines externen LCD-Monitors mit Steadicam Merlin und einer leichten Kamera
21 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Das Hinzufügen eines externen LCD-Monitors, der über ein RCA-Kabel mit einem leichten steadicam-Rig verbunden ist, verschlechtert die Leistung, indem es ein Ungleichgewicht erzeugt, wobei das Kabel das Rig in Richtung der Seite zieht, auf der es hängt.
- Ein dünnes RCA-Kabel kann in einer sanften Kurve hinter der Kamera und durch die Hand des Bedieners geführt werden, um die Gleichgewichtsstörung zu minimieren, obwohl Kabelschlaffheit Experimente erfordert.
- Operating a steadicam with an external monitor separate from the camera creates a disconnect between the operator's physical movements and the visual feedback on screen, potentially causing disorientation similar to wearing video goggles that block peripheral vision.
- The camera's built-in monitor should be prioritized for both functionality and rig balance, as smaller cameras typically have adequate built-in screens that support weight distribution.
- A lightweight external monitor (around 4 ounces) mounted on the wrist with an RCA cable routed down the handle represents a potential workaround, though its operational impact requires testing.
- The Merlin steadicam is primarily designed for very small camcorders and may present fatigue challenges when used with larger cameras like the DVX100.
Hängt ab von
- Discussion pertains specifically to the Merlin rig with a DVX100 camera, making findings applicable mainly to similar lightweight handheld steadicam and camera combinations.
- Recommendations about monitor mounting on the rig's weight platform threads are theoretical and would require custom fabrication.
- The actual performance impact of a wrist-mounted monitor setup was not tested or confirmed in the discussion.
- Comparative data on different cable thicknesses and routing methods is anecdotal rather than systematic.