Was die Diskussion ergab

• Der Archer 2 mit dem G-50-Arm kann Kamerapakete bis zu 18 Kilogramm mit vier Zusatzgewichten fliegen, die unter dem Pfosten und auf dem Monitor Bracket verteilt sind.
• Die Basis Archer 2 mit G-40 Arm kann 12 Kilogramm Kamerapakete ohne zusätzliche Gewichte fliegen.
• The Archer 2 sled weighs 5 kilograms and has a lightweight base design, allowing smaller cameras to be balanced with just a half battery and balance weights without a full weight cage.
• The G-50 arm adjusts tool-free and on the fly across a weight range of approximately 5 to 26 kilograms.
• The Archer 2 system packs entirely into a single case, which provides practical transportation advantages.
• A motorized stage upgrade option is available for the Archer 2.
• The Archer 2 monitor built into the rig is described as tough, bright, and having good viewing angles.
• For camera packages between 12 and 18 kilograms, balance weights must be added below the sled base.
• The Archer 2 is a two-post system with relatively long post length, enabling greater height and depth range than expected.
• Adding balance weights can increase pan inertia while keeping the rig compact, though weights are unnecessary for most camera packages under 12 kilograms.

Hängt ab von

• The manufacturer's published specifications list a lower maximum weight capacity for the G-50 arm than the 26 kilograms claimed in this discussion.
• The post must be extended significantly to balance heavier camera packages near the upper weight limit.
• The G-50 arm's actual weight capacity may vary from unit to unit.
• Information provided is based on personal experience at trade shows and during initial months of use, not comprehensive long-term testing.
• The rig shows flex under stress, though users reported it felt solid in use.

Bauteile

Monitor Bracket

Dieselben Geräte oder Bauteile

1. 2026Rigging eines RED Komodo 6K auf einem CAME-TV Steadicam® Sled für verbesserte Trägheit und Bedientechnik.UmstrittenFacebookSteadicam operators group
2. 2026Montage eines Mo-Sys LED-Wandverfolgungssensors auf ARRI Trinity 2 mit nach oben gerichtetem Sensor für die virtuelle Produktion.FacebookArri Artemis Trinity
3. 2026Modernisierung Steadicam® PRO Sled: Gen-2 Batteriehalter Nachrüstung und Universal Monitor Bracket am Rohrkragen.FacebookSteadicam operators group
4. 2026Finding a bright (1500–2000 nits) low-mode monitor with recording and SDI I/O to replace a defective Transvideo Starlite.UmstrittenFacebookSteadicam operators group