Was die Diskussion ergab

• Primo anamorphe Linsen sind schwerer und größer als ältere anamorphe Linsen der C-Serie, gelten jedoch als für Steadicam verwendbar.
• Die Primo 35mm und 40mm anamorphen Linsen wiegen zwischen 14,8 und 15 Pfund und haben einen Mindestfokusabstand von 3 Fuß 6 Zoll.
• Anamorphe Linsen der C-Serie sind deutlich leichter, mit Brennweiten von 20 mm bis 180 mm und einem Gewicht zwischen 3,5 und 7,7 Pfund je nach Objektiv.
• Anamorphic lenses require compromises in composition and shooting aperture due to their characteristic depth of field behavior differing from spherical lenses.
• Wide anamorphic lenses such as 35mm or 40mm are traditionally used for wide shots rather than close-focus work, and diopters are not practical for moving camera work.
• Anamorphic lens setups mounted on moving camera rigs, particularly in low mode, may develop vibration issues that could be mistaken for camera movement.
• Stiffening the rig with carbon fiber rods and lightweight bridge plates can help reduce vibration problems with heavier anamorphic lens packages.
• Anamorphic projects require extended prep time and cannot be assembled quickly like standard sphericam packages.
• An experienced focus puller with specialized knowledge of anamorphic lens behavior is valuable for successful anamorphic shoots.

Hängt ab von

• Weight specifications provided are primarily for Primo Mark I lenses; Mark II close-focus versions should be similar but exact weights were not available at time of discussion.
• The discussion focuses on Panavision anamorphic lenses; information may not apply to other manufacturers.
• Vibration concerns were reported for specific Steadicam work but the extent of this issue across all anamorphic applications is unclear.
• Experience level varies among contributors; some had direct operator experience while others contributed as assistants or through secondary research.
• The discussion occurred in 2009 and may not reflect current equipment capabilities or alternatives.

Bauteile

Low Mode

Dieselben Geräte oder Bauteile

1. 2026Low Mode und das bild umdrehen: was sie vor dem tag auf der kamera überprüfen solltenOperator practice
2. 2026Lemo-Anschlüsse am ARRI Artemis Sled: Pinout, Polaritätsprüfung und Stromversorgung von Low-Mode Monitoren und Volt Batterie.FacebookSteadicam operators group
3. 2026Die Wahl zwischen Wave, Volt 2 und MK-V Level Gimbals: Leistung bei Wind, Riggewicht, Wartung und Modenumschaltung.UmstrittenFacebookSteadicam operators group
4. 2026Low-Mode Monitorauswahl für Volt Brain rig: Latenzleistung von Transvideo Starlite im Vergleich zu aktuellen Alternativen.UmstrittenFacebookThe Steadicam Group