SteadiHub
2009Forum Steadi-Newbies

Ausstattung und Batterieoptionen für ein Steadicam Pilot Rig

17 Jahre alt. Geräte und Preise können sich seitdem geändert haben.

UmstrittenDie Beteiligten waren sich nicht einig. Lies die Befunde als Positionen, nicht als Antwort.

Was die Diskussion ergab

  • Der Pilot-Stabilisator akzeptiert drei Arten von Batteriehalterungen: AA, V-Lock und Anton Bauer, wobei der Hauptunterschied eher das Batteriepack-Format als der Monitor selbst ist.
  • AA-Batteriesysteme für den Pilot sind in der Regel die wirtschaftlichste Wahl für Anfänger und kosten rund 250 US-Dollar für wiederaufladbare Batterien und Ladegeräte im Vergleich zu teureren V-Lock- oder Anton Bauer-Setups.
  • Precharging three complete AA battery packs allows operators to swap packs on location without needing to access a charger on set, which is more convenient than individual battery management.
  • A single AA pack can power both the Pilot monitor and a wireless video transmitter for approximately three hours of operation.
  • Eight screw-on weights are recommended as additional equipment, particularly when using lighter cameras that may not provide sufficient top weight for proper balance.
  • A balancing tool is mandatory equipment that does not come with the Pilot and must be purchased separately.
  • AA batteries are problematic for powering the camera itself due to voltage compatibility issues with most cameras in that range, making it preferable to rely on the camera's own battery for top weight.
  • Some operators have experienced difficulties balancing the Pilot with AA batteries for low-mode operation, though others report no balance issues across multiple camera models.

Hängt ab von

  • Discussion includes conflicting reports on AA battery system performance, particularly regarding balancing and low-mode operation.
  • Cost comparisons assume standard commercial AA systems rather than custom-built solutions.
  • The equipment thread links provided in the original post are not accessible, limiting verification of specific product comparisons.
  • Experience reports span different camera models and use cases, from lightweight mirrorless to professional cinema cameras.
  • One participant reported constructing a custom battery solution involving soldering and modifications, which may not be practical for most operators.

Bauteile

Low Mode

Dieselben Geräte oder Bauteile

  1. 2026Weste tropfen: was das absenken der armbuchse tatsächlich kauft und was es oben kostetOperator practice
  2. 2026Low-Mode Monitorauswahl für Volt Brain rig: Latenzleistung von Transvideo Starlite im Vergleich zu aktuellen Alternativen.UmstrittenFacebookThe Steadicam Group
  3. 2026Lemo-Anschlüsse am ARRI Artemis Sled: Pinout, Polaritätsprüfung und Stromversorgung von Low-Mode Monitoren und Volt Batterie.FacebookSteadicam operators group
  4. 2026Rig-Setup für den 180-Grad-immersiven Kamerabetrieb mit Blackmagic URSA Cine Immersive: Minimierung der Rig- und Monitorsichtbarkeit im ultraweiten Sichtfeld.FacebookThe Steadicam Group
Originaldiskussion lesenFrage zu dieser DiskussionDie Antwort nennt ihre Quellen