Was die Diskussion ergab

• The side-to-side adjustment knob should move with the same ease as the forward-backward adjustment knob.
• Stiff side-to-side adjustment can be resolved by loosening the button head socket screws on the stage top, then re-torquing them gradually while testing the cross shaft for binding.
• If re-torquing the button head screws does not solve the problem, the set screws in the dovetail can be backed off by approximately 1/16 of a turn, then the button heads can be re-tightened while ensuring the dovetail plate has no play.
• Over-tightening the adjustment screws can create excessive play in the dovetail plate and requires careful repositioning to achieve smooth operation.

Hängt ab von

• The specific hex size mentioned (1/8 inch) and screw locations apply to the Flyer camera rig model discussed; compatibility with other models is unclear.
• The procedure requires trial and adjustment to find the correct torque point.
• No technical reason for the initial stiffness was identified in the discussion.

Bauteile

Dovetail Plate

Dieselben Geräte oder Bauteile

1. 2026Festziehen eines losen Schnellverschlusshebels auf der Top Stage Dovetail-Platte und Verhindern eines Kamerarutschens während der Schulteroperation.UmstrittenFacebookThe Steadicam Group
2. 2026Eliminieren von Vibrationen mit dem ARRI ALEXA 35 auf Steadicam®: starre Montageplattenoptionen, um das Dovetail-System zu umgehenFacebookThe Steadicam Group
3. 2026Wechseln der Kamera zwischen Stativ und Rig: das billigste Upgrade, das die meisten Betreiber nie machenOperator practice
4. 2026Umgang mit Gewichtsbeschränkungen beim Fliegen von großformatigen Filmkameras mit schweren anamorphen Objektiven auf einem Steadicam-RigGeneral Discussion