SteadiHub
2013Forum Steadi-Newbies

Verwendung eines Steadicam Merlin mit Canon 5D Mark III und 70-200 mm Objektiv

13 Jahre alt. Geräte und Preise können sich seitdem geändert haben.

Was die Diskussion ergab

  • Die Kombination eines 5D Mark III mit einem 70-200-mm-Objektiv ist für den Merlin ohne zusätzliche Unterstützung zu schwer und wird nicht richtig ausbalanciert.
  • Der Merlin kann dieses Setup technisch stabilisieren, wenn er mit einem Weste und einem ordnungsgemäßen Rigging verwendet wird, obwohl er sorgfältiges Balancieren und häufige Anpassungen erfordert.
  • Mounting the stabilizer on the lens's tripod support ring, combined with specific weight configurations on the sled, allows the system to function.
  • Using gaffer tape between the mounting plate and stabilizer helps prevent the plate from sliding during operation.
  • The weight and balance challenges make this configuration impractical without a balancing stand or vest, and a heavier-duty sled is preferable for sustained use.
  • Faster, wider prime lenses are better suited to the Merlin than telephoto zooms.

Hängt ab von

  • This represents a marginal use case that works but requires the vest, which the original questioner wanted to avoid.
  • Success depends on careful initial balancing and ongoing adjustment during operation.
  • One participant noted the Merlin's 7.5 lb capacity specification, raising questions about weight limits when additional rigging is added.
  • The solution works in a pinch but is not recommended as a standard configuration.
Originaldiskussion lesenFrage zu dieser DiskussionDie Antwort nennt ihre Quellen