2006Forum Steadi-Newbies
Balancing- und Gewichtungslösungen für kompakte Kamera-Rigs wie die Flyer mit DVX100 und ähnlichen Kameras
20 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Die Montage der Kamera mit einer Low-Mode Griffklemme und das Hinzufügen von Gewichtsplatten oben erhöht den Schwerpunkt und kann das Gleichgewicht relativ zum Gimbal verbessern.
- Maßgeschneiderte Gewichtsplatten, die für bestimmte Kamera-Setups entwickelt wurden, können von Metallgeschäften hergestellt werden, was für eine Käfigstruktur etwa 125 Dollar kostet.
- Weight compensation can be achieved using lead flashing secured with gaffer tape to the camera handle or rig.
- A five kilogram steel plate mounted between the dovetail plate and camera body provides effective counterbalancing for larger rigs.
- Adding small camera lights powered through the rig can provide additional weight needed for balance on lighter camera setups.
- Low-cost balancing solutions using inexpensive electrical plates and gaffer tape are effective when custom machined weights are not available.
- Operators without follow-focus systems may still benefit from weight compensation, though less heavily loaded rigs may require minimal additional weight.
Hängt ab von
- Advice and solutions are specific to early 2000s camera models like DVX100, PD150, and Z-1.
- The effectiveness of weight solutions depends on the specific rig configuration and follow-focus equipment being used.
- Custom fabrication costs and availability may vary by location and vendor.
- Lead flashing and gaffer tape solutions are temporary fixes rather than permanent mounting systems.
Bauteile
Dieselben Geräte oder Bauteile
- 2026Weste tropfen: was das absenken der armbuchse tatsächlich kauft und was es oben kostetOperator practice
- 2026Eliminieren von Vibrationen mit dem ARRI ALEXA 35 auf Steadicam®: starre Montageplattenoptionen, um das Dovetail-System zu umgehenFacebookThe Steadicam Group
- 2026Lemo-Anschlüsse am ARRI Artemis Sled: Pinout, Polaritätsprüfung und Stromversorgung von Low-Mode Monitoren und Volt Batterie.FacebookSteadicam operators group
- 2026Wechseln der Kamera zwischen Stativ und Rig: das billigste Upgrade, das die meisten Betreiber nie machenOperator practice