2009Forum Steadi-Newbies
Gewichtsverteilung und Belastungsgrenzen für den Steadicam Pilot AA Stabilisator
17 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Die maximale Gewichtsgrenze von 10 Pfund für den Pilot AA gilt für die Kamera, den Akku, das Zubehör und alle zusätzlichen Anschraubgewichte, enthält jedoch nicht das strukturelle Gewicht des Sled selbst.
- The Pilot AA battery pack weighs approximately 0.75 pounds.
- Screw-on middle-weights are 0.25 pounds each, while end-weights are 0.125 pounds each.
- Optimal performance is achieved with approximately 2 pounds of weight on the bottom crossbar and 8 pounds on the top stage, which maintains the gimbal position around 2 inches from the stage.
- Placing weights at the ends of the bottom crossbar rather than in the center improves pan smoothness and inertia.
- Excessive weight on the bottom forces the gimbal away from the lens, reducing stability in tilt and roll axes, even if drop time is maintained at 2-3 seconds.
- A tripod adapter makes it easier to mount and remove cameras from the Pilot.
- Using an accurate scale to weigh the complete camera setup including all accessories is essential for proper balancing.
Hängt ab von
- The weight recommendations apply specifically to the Steadicam Pilot AA model.
- The example configuration provided is based on use with a Canon XH-A1 camera weighing 4.5 pounds and may vary with different camera weights.
- Drop time maintenance may conflict with optimal weight distribution for stability.
Bauteile
Dieselben Geräte oder Bauteile
- 2026Upgrade eines älteren Steadicam® MK-V mit 1,5-Zoll-Ständer auf Volt-Konfiguration oder Wechsel auf den neuen Steadicam® Elite (1,25-Zoll-Ständer, 14 kg).FacebookThe Steadicam Group
- 2026Wechseln der Kamera zwischen Stativ und Rig: das billigste Upgrade, das die meisten Betreiber nie machenOperator practice
- 2026Transvideo hat den handel eingestellt: was besitzer ihrer monitore wissen müssenOperator practice
- 2026Wählen Sie zwischen einem Upgrade eines älteren ProVid-2-Kits oder einer Investition in ein professionelles Rig: Workshop-First- versus Equipment-First-Ansatz für Anfänger.UmstrittenFacebookSteadicam operators group