SteadiHub
2015Forum Monitors

Benutzerdefinierte Monitorhalterung und Zubehör-Upgrades für Steadicam Scout, Pilot und Flyer Rigs

Was die Diskussion ergab

  • Ein modifiziertes Monitor Bracket-System ermöglicht eine unabhängige Monitorpositionierung und -höhenanpassung, ohne durch Batterieplatzierung eingeschränkt zu werden, ähnlich wie bei höherwertigen Steadicam-Modellen.
  • The upgrade enables easier dynamic balance adjustment by allowing modification of the rig's moment of inertia through monitor positioning.
  • A secondary simple monitor mount design accommodates monitors that have screw threads only at the base rather than on both sides.
  • Replacing the plastic chest buckle on Scout and Flyer vests with a ratcheting buckle provides easier tension adjustment.
  • The complete upgrade package adds approximately 400 grams to the sled weight.
  • Monitor mounting on the original Pilot setup with thin monitors can cause rocking and vibration transmission during flight, which the new mount design reduces by providing increased surface contact area.
  • Users reported the modification remained functional and reliable after several years of field use.
  • The upgrade works with Steadicam Scout and should work with Pilot and Flyer models if the lower pole diameter is exactly 23.9mm, though compatibility with Flyer models was not directly tested.

Hängt ab von

  • The modification for monitors without side-mounted threads eliminates the ability to use monitor yokes.
  • Pilot and Flyer compatibility assumed but not confirmed since the designer did not have those models available for testing.
  • The vest buckle modification is irreversible as it requires removing the original fastex buckle and cutting the original strap.
  • Long-term durability data limited to user reports; original designer no longer actively operates Steadicam equipment.
  • Compatibility with Flyer LE variant was questioned but not definitively answered in the thread.

Bauteile

Monitor Bracket

Dieselben Geräte oder Bauteile

  1. 2026Montage eines Mo-Sys LED-Wandverfolgungssensors auf ARRI Trinity 2 mit nach oben gerichtetem Sensor für die virtuelle Produktion.FacebookArri Artemis Trinity
  2. 2026Rigging eines RED Komodo 6K auf einem CAME-TV Steadicam® Sled für verbesserte Trägheit und Bedientechnik.UmstrittenFacebookSteadicam operators group
  3. 2026Alles von der Sled antreiben: Spannung, Strom und warum die beiden verwirrt werdenOperator practice
  4. 2026Auswahl und Fehlersuche des Monitors auf einem Stabilisator-RigUmstrittenOperator practice
Originaldiskussion lesenFrage zu dieser DiskussionDie Antwort nennt ihre Quellen