ما توصّل إليه النقاش

• The FlyerLE has a single power port on the camera stage that can be split using a custom breakout box to provide multiple output connectors.
• A custom breakout box converting a single 3-pin Lemo connector to multiple 3-pin Lemo outputs can be commissioned from experienced cable technicians.
• Lemo manufactures splitter adapters specifically designed for Flyer and FlyerLE models that provide one male input and two female outputs.
• Power distribution solutions that bypass the original port rather than consuming it allow the main port to remain available for additional connections.
• Before implementing power solutions, verify that total power draw remains within the sled's specifications by consulting the manufacturer.
• The FlyerLE gimbal and post are physically limited in capacity and weight limitations should be strictly observed to avoid performance degradation and equipment damage.
• Junction boxes with multiple output connector types (P-tap, XLR, Tiffen, etc.) can be wired directly to the sled to maximize available power ports.
• A Sony F3 can power itself from its own batteries while the FlyerLE power port supplies focus motor and video transmitter systems.
• The BFD wireless receiver is more practical than a FIZ system on an F3 due to space constraints on the FlyerLE stage.

يعتمد على

• Solutions are specific to FlyerLE limitations and may not apply to full-size rigs.
• Weight capacity must be verified and respected to prevent equipment damage.
• Connector compatibility depends on existing cables and future needs.
• Space on the camera stage is limited for mounting auxiliary equipment.
• These solutions work within the stated power capacity of the rig and should not be assumed to work beyond those limits.

المعدات في هذا النقاش

FI+Z, MDR, BFD

القطع

Base Plate

المعدات أو القطع نفسها

1. 2026Los power on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.موضع خلافFacebookArri Artemis Trinity
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest work flow.FacebookSteadicam operators group
3. 2026تشغيل Steadicam® Zephyr دون Volt: drop time، مراقبة الأفق، وتأثير توزيع الوزن الأعلى على التوازن.موضع خلافFacebookSteadicam operators group
4. 2026تبدل الكاميرا بين الشاحنات الثلاثية والأجهزة: أرخص ترقية لمعظم المشغلين لا تجعلOperator practice