2004Forum Follow Focus
Fehlerbehebung drahtlose Follow Focus Verbindung zu SR2-Kamera über BFD und Stop-Start-Kabel
22 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Ältere Kameramodelle wie SR2, Arri 3 und BL erfordern einen konstanten Kontaktmodus anstelle eines momentanen Kontakts für die Aktivierung durch drahtlose Follow Focus-Systeme.
- Der SR2 verwendet eine andere Pin-Konfiguration an seinem 11-poligen Fischer-Anschluss im Vergleich zu späteren Modellen wie SR3, die die Kompatibilität mit drahtlosen Steuergeräten beeinträchtigen können.
- When troubleshooting a non-responsive wireless follow focus connection, verify signal transmission by listening for an audible click at the receiver when toggling the run switch, and check that the motor on the camera body attempts to turn.
- The 11-pin Fischer connector on SR2, Arri 3, and BL cameras assigns pin 7 to run function, pin 9 to ground, and pin 11 to 12VDC output.
- Possible causes for wireless follow focus failure include a faulty cable between the receiver and camera remote switch, a defective remote switch on the camera, or plugging into a power-output-only Fischer connector instead of the correct one.
- Testing with a hardwired standard remote switch can help isolate whether the problem lies in the wireless system or in the camera's receiver connection.
Hängt ab von
- The specific pin configuration for SR2 was provided by forum members but not independently verified in this thread.
- Discussion focused on SR2, Arri 3, and BL models; other camera models may have different requirements.
- Troubleshooting steps were suggested but outcomes of implementing them were not reported back in the thread.
Geräte in dieser Diskussion
Bauteile
Dieselben Geräte oder Bauteile
- 2026Fokussieren und Zoomen Sie sich während des Betriebs, insbesondere bei Live-ShowsOperator practice
- 2026Wechseln eines ARRI ALEXA 35 zwischen Stativ/Studio und Steadicam® Montage: Grundplattenwahl und schnellster Workflow.FacebookSteadicam operators group
- 2025Geschichte der drahtlosen Fokus- und Linsensteuerungssysteme für Steadicam®: von kabelbasierten Cinema Products und Seitz bis Preston digitalen und europäischen Lösungen von Chrosziel, cmotion und ARRI.FacebookSteadicam operators group
- 2025LC-1 (Lens Control-1) Follow Focus-System: verdrahtete Architektur, Motoren und frühe Betriebserfahrung (1990er Jahre).FacebookThe Steadicam Group