SteadiHub
2010Forum Cameras (Film/Video/HD)

Power Delivery Herausforderungen beim Betrieb Sony F35 Kamera auf MK-V Steadicam rigs

16 Jahre alt. Geräte und Preise können sich seitdem geändert haben.

Was die Diskussion ergab

  • Der Sony F35 Kamerakopf allein zieht etwa 4 Ampere bei 14 Volt, aber wenn das SRW-Deck in einer einstückigen Konfiguration an die Kamera angedockt ist, erreicht die kombinierte Leistungsaufnahme 12 bis 14 Ampere, was die Kapazität von Standard MK-V Postkabeln mit 22-Gauge-Draht für 4 bis 6 Ampere übersteigt.
  • Der Betrieb von Hochleistungskameras durch untergroße Postkabel verursacht Kabelüberhitzung, kurze Akkulaufzeit, Schäden an J-Box-Verbindungen und Leiterbahnheben aufgrund von übermäßigem Strom und Hitze.
  • Two-piece camera setup with direct on-board adapter power or separate battery powering can reduce the power demand on the post cable compared to one-piece docked configuration.
  • Rewiring the MK-V post with larger gauge wire and reconfiguring auxiliary power feeds to distribute load across two battery runs can partially mitigate power delivery problems, though this modification sacrifices the AR cable run.
  • Low voltage warnings on the camera display despite fully charged batteries indicate voltage drop across undersized power cables from the rig to the camera.
  • Multiple accessory loads connected to the rig simultaneously, such as wireless follow focus motors, timecode generators, and video monitoring systems, further increase total current draw and compound power delivery issues.

Hängt ab von

  • The modifications described were implemented on specific individual rigs and may not be universal solutions.
  • Disabling the AR cable by reconfiguring the post eliminates remote iris control capability.
  • Power specifications vary depending on whether the camera head is recording or in standby mode, and whether ancillary equipment is powered from the rig.
  • The Alexa draws different wattages depending on whether it is powered at 12 volts or 24 volts, and these specifications may not directly apply to the F35.

Bauteile

Follow Focus

Dieselben Geräte oder Bauteile

  1. 2026Fokussieren und Zoomen Sie sich während des Betriebs, insbesondere bei Live-ShowsOperator practice
  2. 2026Wechseln eines ARRI ALEXA 35 zwischen Stativ/Studio und Steadicam® Montage: Grundplattenwahl und schnellster Workflow.FacebookSteadicam operators group
  3. 2025LC-1 (Lens Control-1) Follow Focus-System: verdrahtete Architektur, Motoren und frühe Betriebserfahrung (1990er Jahre).FacebookThe Steadicam Group
  4. 2024Modifikationen an einem Steadicam Scout-Rig für erweiterte Stromverteilung und KonnektivitätGeneral Discussion
Originaldiskussion lesenFrage zu dieser DiskussionDie Antwort nennt ihre Quellen