2004Forum Follow Focus
M-One-Linsen-Antriebsmotorleistung mit Follow Focus Systemen
22 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Der M-One-Motor ist kompakt und vertikal ausgerichtet und passt in enge Räume, in denen größere Motoren kämpfen.
- Der Motor liefert starke Zugkraft und schnelle Reaktion über eine Reihe von Linsentypen und Widerstandsstufen.
- Der Motor betreibt erfolgreich steife Linsen, einschließlich älterer Modelle, die für andere Antriebssysteme schwierig sind.
- Schnellveröffentlichungsgetriebe erfordern keine Werkzeuge und können sofort ausgetauscht werden.
- The potentiometer is positioned directly behind the gear to ensure accuracy but prevents mounting the gear on either side of the motor.
- A five-pin Lemo connector is used, consistent with most analog motors and can be rotated to clear obstructions.
- The motor is significantly heavier than comparable models, approximately 1.5 times the weight of alternative options.
- When vibration and double-mark problems occur during operation, potentiometer failure or power supply inadequacy are possible causes.
- Lens barrel stiffness in cold conditions can exceed the motor's capability, though competing products showed similar limitations under extreme cold.
- The motor package includes all necessary components for immediate setup without additional purchases required.
Hängt ab von
- The design prevents gear mounting on both sides of the motor due to potentiometer placement, though the sliding bracket mitigates this limitation.
- Extreme cold weather can prevent the motor from turning very stiff lenses, though this appears to be a limitation of the technology generally rather than a specific weakness.
- Weight considerations may make it unsuitable as a primary choice for applications where lens stiffness is not a concern.
- Heavy anamorphic lenses with front-mounted supports require careful rigging consideration and potential custom machining solutions.
- Potentiometer-related issues have been reported, though causation between mechanical impact and failure was disputed in one instance.
- Service availability and response time depend on manufacturer contact and repair arrangements.
Geräte in dieser Diskussion
Bauteile
Dieselben Geräte oder Bauteile
- 2026Fokussieren und Zoomen Sie sich während des Betriebs, insbesondere bei Live-ShowsOperator practice
- 2026Wechseln eines ARRI ALEXA 35 zwischen Stativ/Studio und Steadicam® Montage: Grundplattenwahl und schnellster Workflow.FacebookSteadicam operators group
- 2025Geschichte der drahtlosen Fokus- und Linsensteuerungssysteme für Steadicam®: von kabelbasierten Cinema Products und Seitz bis Preston digitalen und europäischen Lösungen von Chrosziel, cmotion und ARRI.FacebookSteadicam operators group
- 2025LC-1 (Lens Control-1) Follow Focus-System: verdrahtete Architektur, Motoren und frühe Betriebserfahrung (1990er Jahre).FacebookThe Steadicam Group