SteadiHub
2009Forum Steadi-Newbies

Anfänger steadicam-Rig-Einrichtungsempfehlungen und Komponentenauswahl für das Flyer LE-System

17 Jahre alt. Geräte und Preise können sich seitdem geändert haben.

Was die Diskussion ergab

  • V-Mount or Anton Bauer batteries are recommended for powering steadicam rigs, with V-Mount being convertible to Anton Bauer via a small adapter plate
  • The Flyer LE system includes a standard definition monitor rather than an HD-SDI monitor, which is adequate for most work though some HD cameras like the RED require a downconverter for compatibility
  • Purchasing duplicate and triplicate small components such as cables, adapters, screws, and locating pins helps prevent loss or damage during operation
  • Weight capacity is a significant limitation of the Flyer LE, with most RED One configurations exceeding the rig's maximum payload capability
  • Monitor brightness measured in nits is more critical than pixel count for steadicam work, especially when operating in bright daylight conditions
  • Wireless follow focus controls and wireless video monitoring are commonly needed accessories for professional steadicam operation
  • RED camera power should be sourced from the steadicam sled itself rather than relying on the camera's internal battery to maximize operational flexibility and accessory options
  • Used steadicam rigs in larger weight classes may offer better capability for the cost compared to entry-level new systems
  • Weight plates can be used to allow smaller cameras to operate on steadicam rigs designed for heavier payloads

Hängt ab von

  • Discussion occurred in 2009 and equipment mentioned may be obsolete or superseded
  • Weight limitations of Flyer LE are particularly problematic for RED One camera work
  • One participant expressed frustration with outgrowing the Flyer LE rig early in their operation
  • Compatibility between different battery mount types and power requirements requires additional adapters and custom cables

Bauteile

Follow Focus

Dieselben Geräte oder Bauteile

  1. 2026Wechseln eines ARRI ALEXA 35 zwischen Stativ/Studio und Steadicam® Montage: Grundplattenwahl und schnellster Workflow.FacebookSteadicam operators group
  2. 2026Fokussieren und Zoomen Sie sich während des Betriebs, insbesondere bei Live-ShowsOperator practice
  3. 2025LC-1 (Lens Control-1) Follow Focus-System: verdrahtete Architektur, Motoren und frühe Betriebserfahrung (1990er Jahre).FacebookThe Steadicam Group
  4. 2024Modifikationen an einem Steadicam Scout-Rig für erweiterte Stromverteilung und KonnektivitätGeneral Discussion
Originaldiskussion lesenFrage zu dieser DiskussionDie Antwort nennt ihre Quellen