2009Forum Cameras (Film/Video/HD)
Konfigurieren eines leichten RED-Kamera-Rigs für erweiterte Konzertaufnahmen auf einem Steadicam
17 Jahre alt. Geräte und Preise können sich seitdem geändert haben.
Was die Diskussion ergab
- Ein komplettes RED Steadicam-Rig einschließlich Kamera, Antrieb, Sender, Fokusmotoren und Batterie kann montiert werden, um etwa 30 Pfund zu wiegen, wenn es an wesentliche Komponenten abgestreift wird
- Die Montage von Antrieb und Sender an der Basis des Rigs und nicht an der Oberseite verbessert die Balance und Gewichtsverteilung
- Preston MDR fokussteuerung ist leichter als full-size-alternativen und eignet sich für konzertarbeiten
- RED-Brick-Batterien bieten mehr Wattstunden als Dionic-Batterien, obwohl HC-Batterien trotz geringerer Gesamtwattstunden eine höhere Stromabgabe liefern
- Extending the drive cable can introduce signal problems requiring reversion to standard cable length, necessitating rig reconfiguration
- A lightweight running rig with modular battery and plate mounting allows quick reconfiguration when equipment changes are needed mid-shoot
- External cabling routed along the rig rather than internal routing performed reliably during active concert filming
- Operating a RED on Steadicam for over two hours with only battery and reboot breaks every 20 minutes is achievable with a well-optimized lightweight configuration
- Viewing angle limitations of the RED onboard monitor can be addressed by using a separate external monitor on a movable mount
- Concert shoots with restrictive stage access benefit significantly from reduced rig weight to enable quick repositioning around security and obstacles
Hängt ab von
- Experience is specific to one concert shoot in 2009
- Equipment specifications and availability reflect pre-NAB timing constraints
- Drive stability issues occurred but root cause was unclear and footage integrity was uncertain
- The RED zoom lens was not available during concurrent concert shoots mentioned in discussion
- Stage access restrictions varied from ideal positioning for capturing footage
- All weight savings principles apply specifically to Steadicam rig configuration, not handheld operation
Geräte in dieser Diskussion
Dieselben Geräte oder Bauteile
- 2026Leistungsverlust auf Trinity 2 / Artemis 2 mit großen Kameras (A35, Venedig): Ursachen und Batterielösungen.UmstrittenFacebookArri Artemis Trinity
- 2025Benutzerdefinierte Servo-Zoom-Steuerung für Tilta Nucleus-System mit Bebob Zoe-Gehäuse und 7-Pin-LEMO-SteckverbinderFacebookSteadicam operators group
- 2024Montage Sony Venice 2 auf ARRI Trinity mit SAM-0-Platte: Baukonfiguration und Balancierungsstrategien.FacebookArri Artemis Trinity
- 2023Balancieren und Verkürzen eines Steadicam®-Rigs mit einem schweren Zoomobjektiv (14-15 lbs).FacebookThe Steadicam Group