Mounting and powering a Red camera on a Steadicam Flyer

2010Forum Steadi-Newbies

Montage und Stromversorgung einer roten Kamera auf einer Steadicam Flyer

16 Jahre alt. Geräte und Preise können sich seitdem geändert haben.

The Red camera requires 12 volts and draws approximately 80 watts, making it feasible to power from a Flyer onboard battery system though runtime is limited depending on battery type and capacity.
Red Brick batteries mounted on the sled plate provide a more practical power solution than relying solely on Flyer onboard batteries, which may only provide 30 minutes of runtime per battery when powering the camera.
A custom power cable with a 3-pin XLR Lemo connector can connect Flyer power output to the Red camera, though standard Flyer power cables (4-pin XLR) may also work directly.
Video output from the Red requires an HDSDI BNC connector from the camera's video breakout box, then routed through a downconverter like the Decimator to display on an onboard monitor.
Achieving the weight capacity on a standard Flyer requires stripping the Red to essentials: body, prime lens, video breakout device, downconverter, clip-on matte box, and CF card recording, totaling approximately 17-19 pounds.
Operating significantly over the official weight limit of 15 pounds for a Flyer or 19 pounds for a Flyer LE increases risk of gimbal strain and potential system damage over time.
Powering multiple accessories like downconverters and follow focus systems from a single Flyer power output creates demand for additional power distribution solutions or custom cables.
Wireless lens control systems are lighter alternatives to mechanical focus follow systems when mounting a Red on a Flyer.

Runtime estimates for onboard batteries are anecdotal and vary based on specific battery models and what other equipment draws power.
Weight tolerance discussions reflect operator experience and preference rather than manufacturer specifications; experiences with exceeding limits without immediate failure do not guarantee safety.
Specific power connector configurations may differ between Flyer and Flyer LE models, requiring verification before attempting connections.
The Red camera's heat vents are located on the bottom, which could create thermal considerations when mounting additional recording devices or storage directly to the rig.
Recording solutions such as external raid drives require secure mounting and add weight, which may approach or exceed safe operating limits.