2011Foro Batteries/Power
Arri Anomalías de lectura de batería Alexa y optimización de tensión con baterías Dionic HC
Tiene 15 años. Es posible que el equipo y los precios hayan cambiado desde entonces.
Lo que encontró el hilo
- Las lecturas de la capacidad de la batería en la pantalla de Alexa muestran '1' inmediatamente después de la puesta en marcha reflejan el tiempo de funcionamiento estimado en horas en el cuadro de potencia actual en lugar de un mal funcionamiento, y el tiempo de funcionamiento real de la cámara sigue siendo aceptable.
- El Alexa opera internamente como un sistema 24V e incluye un convertidor DC-DC que actualiza la entrada 12V a 24V para la operación portuaria RS.
- Powering the camera at 24-28V is more efficient than 12V because it eliminates the need for internal voltage conversion, resulting in lower amperage draw from batteries and extended battery life.
- The Alexa automatically selects the power source with the highest voltage when multiple batteries are connected, switching automatically when voltage drops, allowing flexible dual-battery configurations.
- Single Dionic HC batteries provide adequate runtime for camera-only operation but produce modest endurance when powering multiple accessories like external recorders, wireless systems, and follow focus units.
- Using dual Dionic HC batteries simultaneously via an A/B hot-swap adapter on the camera back improves runtime significantly.
- Some operators report better single-battery performance using Hytron 140 batteries instead of Dionic models for handheld work.
- The camera accepts input voltage ranging from 10.5V to 34V, with different operational configurations available through menu settings for low power warnings on onboard versus external 2-pin Fischer connectors.
Depende de
- Reports span 2011 timeframe so may not reflect current firmware or hardware revisions.
- The preferred '24V' terminology and efficiency gains are described by multiple sources but some details lack official specification documentation in the thread.
- Runtime figures are anecdotal and vary significantly based on accessory loads, environmental conditions, and individual camera configurations.
- One operator reports the camera did not work with 12V input via the 2-pin power connector, conflicting with general voltage range specifications mentioned.
Equipo de este hilo
Piezas
Mismo equipo o piezas
- 2026Tener enfoque y acercarse mientras opera, especialmente en programas en vivoOperator practice
- 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group
- 2025LC-1 (Lens Control-1) sistema follow focus: arquitectura cableada, motores y experiencia operativa temprana (1990s).FacebookThe Steadicam Group
- 2024Modificaciones a una plataforma Scout Steadicam para la distribución de potencia ampliada y conectividadGeneral Discussion