Lo que encontró el hilo

• El cuerpo de cámara Sony F900 solo pesa alrededor de 10 libras pero consume energía significativa; añadir visor, baterías, equipo de soporte y accesorios aumenta sustancialmente el peso total y lo hace marginal o inadecuado para Flyer LE operación.
• Los paquetes de cámara RED ONE suelen ser demasiado pesados y potentes para una operación práctica de Flyer LE cuando están equipados con accesorios del mundo real como caja mate, follow focus, contraventa y lentes.
• Los cálculos de peso teóricos a menudo subestiman el peso real de la plataforma en la producción porque las cámaras invariablemente reciben accesorios adicionales más allá de las especificaciones iniciales.
• Compact flash cards are essential rather than optional when attempting to operate RED ONE on Flyer LE due to power constraints.
• Two RED power bricks provide insufficient runtime for the RED camera; extended operation will require AC tethering after approximately three hours.
• Productions frequently request features during setup that were not anticipated during initial planning, forcing operators to add weight and complexity beyond the stripped-down configurations discussed in pre-production.
• Operators should physically test camera packages with rental houses before production rather than relying on specifications and producer promises.
• Using a Flyer LE for cameras exceeding its practical weight and accessory capacity risks damaging operator reputation regardless of advance communication about limitations.
• Stripping a RED ONE to bare minimum configuration with only a prime lens and lightweight accessories makes it barely feasible on Flyer LE, but this rarely matches production requirements.
• First-time operators should prioritize securing appropriate rig size over preserving budget margins, as struggling with inadequate equipment creates performance problems that clients remember.

Depende de

• Discussion occurred in 2009 and reflects capabilities of Flyer LE and RED ONE hardware from that era.
• Specific models of F900 were not definitively identified in thread; different versions had varying power requirements and accessory compatibility.
• Union and non-union labor considerations discussed are specific to Michigan production context and may not apply universally.
• Power requirements discussed are based on typical production scenarios and may vary with specific camera configurations.
• Opinions about whether cameras can be flown on Flyer LE diverged based on differing interpretations of 'practical' versus theoretical possibility.

Equipo de este hilo

MDR

Piezas

Dovetail Plate, Follow Focus, Base Plate

Mismo equipo o piezas

1. 2026Pérdida de potencia en Trinity 2 / Artemis 2 con grandes cámaras (A35, Venecia): causas y soluciones de batería.DiscutidoFacebookArri Artemis Trinity
2. 2026Cambie la cámara entre trípode y plataforma: la actualización más barata que la mayoría de los operadores nunca hacenOperator practice
3. 2026Operando un Steadicam® Zephyr sin Volt: drop time, control de horizontes, y el efecto de la distribución de peso de altura sobre balance.DiscutidoFacebookSteadicam operators group
4. 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group