Lo que encontró el hilo

• An Arri SR3 camera can be powered from a Clipper 324 sled's 24V Lemo connector without issues, even when voltage approaches the upper acceptable limit.
• Voltage from a Clipper 324 with two Steadicam cubes starts around 33.28V and drops to approximately 32.20V within the first minute of use, remaining within acceptable operating parameters.
• Using sled power instead of camera battery can reduce weight on the stabilizing arm, though the camera battery can alternatively serve as ballast for balance.
• Additional powered devices on the sled such as follow focus systems and video transmitters will draw additional current and further reduce voltage.

Depende de

• The advice is based on experience with Clipper 324 and PowerCube batteries, not exhaustive testing across all conditions.
• This approach assumes familiarity with acceptable voltage ranges and camera protection mechanisms.

Piezas

Follow Focus

Mismo equipo o piezas

1. 2026Tener enfoque y acercarse mientras opera, especialmente en programas en vivoOperator practice
2. 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) sistema follow focus: arquitectura cableada, motores y experiencia operativa temprana (1990s).FacebookThe Steadicam Group
4. 2024Modificaciones a una plataforma Scout Steadicam para la distribución de potencia ampliada y conectividadGeneral Discussion