Lo que encontró el hilo

• El cable Red One start/stop no es compatible con el Epic-X debido a diferentes pinouts de conector y requisitos eléctricos.
• The Epic uses a 00-pin 4-pin Lemo connector that outputs timecode information and GPIO signals.
• To trigger recording on an Epic, the GPIO pin must be pulled to 3.3 volts and held at that level, requiring a specialized cable design.
• A run/stop solution for Epic cameras using wireless follow focus receivers typically requires multiple components: a trigger box, a power cable with 2-pin Lemo connector, a 4-pin Lemo start/stop cable, and a separate Lemo-to-BNC breakout cable.
• Third-party manufacturers including Preston, Cmotion, and others developed Epic-compatible run/stop cables to address the gap left by Red's connector design.

Depende de

• Discussion reflects equipment and availability status as of 2012.
• Some participants expressed preference for different cable designs and power delivery methods, indicating no single solution satisfied all users.
• The complexity of the system and reliance on multiple cables was noted as a limitation.
• Compatibility with specific follow focus receivers such as analog versus digital versions varies depending on cable design.

Piezas

Follow Focus

Mismo equipo o piezas

1. 2026Tener enfoque y acercarse mientras opera, especialmente en programas en vivoOperator practice
2. 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) sistema follow focus: arquitectura cableada, motores y experiencia operativa temprana (1990s).FacebookThe Steadicam Group
4. 2024Modificaciones a una plataforma Scout Steadicam para la distribución de potencia ampliada y conectividadGeneral Discussion