2007Foro Arms
Volando una cámara Arri 435 en un brazo EFP steadicam
Tiene 19 años. Es posible que el equipo y los precios hayan cambiado desde entonces.
Lo que encontró el hilo
- Un brazo EFP equipado con manantiales rojos se clasifica para una carga máxima de 38 libras, por lo que se subsize para una configuración totalmente enrollada Arri 435
- Una configuración completa Arri 435 incluyendo la revista cargada, accesorios, follow focus, y la caja mate puede pesar alrededor de 22 libras para el paquete de la cámara solo, con toda la plataforma alcanzando aproximadamente 55 a 63 libras total
- Despite exceeding the arm's rated capacity, an operator successfully flew a complete Arri 435 rig on an EFP with red springs by carefully managing the weight distribution and using a separate battery belt
- The Arri 435 requires 24 volts of power, necessitating either modification to the steadicam rig's power supply or the use of a separate battery pack worn by the operator or assistant
- A 100% video top is a specialized Arri component that replaces the standard viewfinder with an integrated video assist, features a flat top with mounting holes for dovetail plates, and includes a built-in bracket for motor rods, making it particularly useful for steadicam work in low-mode
- Testing the complete camera configuration at a rental house before the shoot is essential to verify that all components work together and to identify potential issues early
- The Clipper 2 steadicam arm has been successfully used with loaded Arri 435 cameras
Depende de
- The successful flight exceeded the EFP's rated specifications and may not be reliably repeatable across different arms or configurations
- The operator lacked prior film camera experience and relied heavily on rental house support to validate the setup
- Power delivery to the camera was compromised and required a workaround using an external battery belt rather than native rig power
- Variable prime lenses and heavy matte boxes add significant weight that could prevent the configuration from working on an undersized arm
- The discussion does not provide definitive weight measurements for all possible accessory combinations
Piezas
Mismo equipo o piezas
- 2026Chaleco gotas: lo que baja la toma del brazo realmente compra, y lo que cuesta en la parte superiorOperator practice
- 2026Conectores Lemo en el ARRI Artemis sled: pinout, verificación de polaridad y potenciación de low-mode monitores y batería Volt.FacebookSteadicam operators group
- 2026Low-mode monitor selección para Volt Cerebro rig: rendimiento de latencia de Transvideo Starlite frente a las alternativas actuales.DiscutidoFacebookThe Steadicam Group
- 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group