Lo que encontró el hilo

• Un sistema de placa de peso montado en dovetail permite a los operadores añadir 0.8 a 1,65 libras de peso adicional al fondo del cine sleds, permitiendo el uso de puestos más cortos mientras mantiene el equilibrio.
• The weight plate can be positioned anywhere within a 5-inch range along the dovetail for fine-tuning balance characteristics.
• The system was developed through 7 months of prototyping and testing before public release.
• Adding weight to the sled bottom permits extended top posts in low-mode operation without extending bottom posts.
• The weight plate can be tapped to accept a 3/8-inch 16-thread gyroscope mount.
• Battery plate variations with pre-drilled holes for IDX or Anton Bauer batteries allow operators to use battery weight as functional counterbalance.
• The base aluminum plate weighs approximately 1.0 pound and remains functional without additional weight plates for lighter balance needs.

Depende de

• Designed specifically for Tiffen full-size sleds with dovetail bottoms (Ultra2, Original Ultra Cine series, Vector, Clipper series).
• User experience limited to main weight plate and weight number one; weights two and three were not extensively field-tested by the reviewer.
• Practical benefit noted primarily for professional aerial and motion control work rather than consumer-level productions.

Piezas

Low Mode

Mismo equipo o piezas

1. 2026Chaleco gotas: lo que baja la toma del brazo realmente compra, y lo que cuesta en la parte superiorOperator practice
2. 2026Low-mode monitor selección para Volt Cerebro rig: rendimiento de latencia de Transvideo Starlite frente a las alternativas actuales.DiscutidoFacebookThe Steadicam Group
3. 2026Conectores Lemo en el ARRI Artemis sled: pinout, verificación de polaridad y potenciación de low-mode monitores y batería Volt.FacebookSteadicam operators group
4. 2026Montaje del cerebro TIFFEN Volt: comparación de rigidez entre ARRI montajes de varillas y montajes CamJam para minimizar vibracionesDiscutidoSteadiHub