Lo que encontró el hilo

• The Seitz 8700 system uses a 9-pin D-connector with specific pin assignments for power, ground, camera run signals, and three channel signals.
• Pin 4 and Pin 7 both supply 12 volts DC, with Pin 4 for general power and Pin 7 specifically for powering the amplifier.
• Pin 3 provides ground connection using black 24 AWG wire.
• The receiver can be powered independently by providing 12 volts DC and ground through the appropriate pins of the 9-pin D-connector without requiring a Steadicam IIIA unit.
• A custom cable or adapter box matching the pinout of the original IIIA connector can be engineered to power and operate the 8700 receiver standalone.

Depende de

• The technical manual for the Seitz 8700A was described as vague regarding connector specifications, using general descriptions rather than detailed pinouts.
• The Seitz company did not service these units after discontinuation and did not publish detailed customer-accessible documentation.
• The pinout for Lemo signal cables used in the system was not documented in available sources at the time of discussion.
• This discussion centers on 8700 and 8700A models from the early 2000s era.

Piezas

Follow Focus

Mismo equipo o piezas

1. 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group
2. 2026Tener enfoque y acercarse mientras opera, especialmente en programas en vivoOperator practice
3. 2025LC-1 (Lens Control-1) sistema follow focus: arquitectura cableada, motores y experiencia operativa temprana (1990s).FacebookThe Steadicam Group
4. 2024Modificaciones a una plataforma Scout Steadicam para la distribución de potencia ampliada y conectividadGeneral Discussion