Lo que encontró el hilo

• A microprocessor-controlled interface cable enables the Canon C100, C300, and C500 to transmit camera start and stop signals to Bartech, Preston, and C-Motion remote follow focus systems through existing 3-pin Fisher Arri Run cables.
• The interface uses the camera's 2.5mm stereo LANC port to communicate run and stop commands via onboard microprocessor monitoring.
• A green LED on the interface indicates successful cable connection and camera power status.
• A red LED indicates when the camera is recording, with the microprocessor continuously verifying camera status through LANC protocol communication.
• The system is compatible with both analog and digital Bartech systems.

Depende de

• Limited to Canon C100, C300, and C500 camera models.
• Requires existing 3-pin Fisher Arri Run cables for integration with follow focus systems.

Piezas

Follow Focus

Mismo equipo o piezas

1. 2026Tener enfoque y acercarse mientras opera, especialmente en programas en vivoOperator practice
2. 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) sistema follow focus: arquitectura cableada, motores y experiencia operativa temprana (1990s).FacebookThe Steadicam Group
4. 2024Modificaciones a una plataforma Scout Steadicam para la distribución de potencia ampliada y conectividadGeneral Discussion