2013Foro Monitors
Cinetronic Generation 2 monitorea cuestiones técnicas, soluciones y experiencias de usuario
Tiene 13 años. Es posible que el equipo y los precios hayan cambiado desde entonces.
DiscutidoLos participantes no estuvieron de acuerdo y no llegaron a una conclusión. Lee los hallazgos como posturas, no como una respuesta.
Lo que encontró el hilo
- Inicialmente, el monitor tenía problemas de firmware con la detección progresiva de señales de marco segmentado (PsF), especialmente con 720p 24PsF que no es un estándar SMPTE válido, aunque 1080p 24PsF fue declarado como aceptable.
- Algunas unidades experimentaron problemas de sobrecalentamiento que se abordaron a través de una adaptación de hardware ofrecida por el fabricante.
- La sensibilidad del botón táctil fue inicialmente demasiado alta, respondiendo a los dedos de acaparamiento sin contacto, que se trató en actualizaciones de firmware.
- El monitor no retuvo la configuración de backlight frameline y touchpad después de power-off hasta que una actualización de firmware de julio de 2013 resolvió esto.
- Tally input detection required modification when using photosensor tally systems, as the input was designed to accept a 2-24V range and needed a resistor added for simple photosensor setups.
- Anton Bauer battery plates could backfeed power through the 8-pin LEMO connector, requiring a diode modification inside the monitor.
- Firmware installation was initially limited to Windows systems only, with Mac and Linux users able to use virtualization software as a workaround.
- Some users reported image freezing and random input switching that improved after receiving heat sink upgrades and touch panel replacements.
- Ghosting artifacts were observed in the picture output, potentially related to 60Hz and 50Hz differences, though the cause remained unclear.
- The monitor did not reliably accept PsF signals from certain professional cameras like the Sony F65 and Alexa, despite accepting P signals from the same cameras.
Depende de
- Testing was limited mostly to theoretical validation rather than comprehensive field testing with actual cinema cameras.
- The PsF detection issue remained unresolved despite manufacturer claims of SMPTE compliance, with conflicting reports about 1080p PsF compatibility.
- Early firmware versions had significant stability issues that were only partially resolved through updates.
- Mac and Linux users faced barriers to updating firmware without access to Windows systems.
- The digital level accessory was not yet completed and functional during the discussion period, limiting the monitor's standalone usability.
- Some issues like ghosting artifacts had unclear root causes and no definitive solutions were established.