Lo que encontró el hilo

• La cámara roja requiere 12 voltios y dibuja aproximadamente 80 vatios, por lo que es factible accionar desde un sistema de batería a bordo de Flyer aunque el tiempo de funcionamiento es limitado dependiendo del tipo de batería y la capacidad.
• Red Brick batteries mounted on the sled plate provide a more practical power solution than relying solely on Flyer onboard batteries, which may only provide 30 minutes of runtime per battery when powering the camera.
• A custom power cable with a 3-pin XLR Lemo connector can connect Flyer power output to the Red camera, though standard Flyer power cables (4-pin XLR) may also work directly.
• Video output from the Red requires an HDSDI BNC connector from the camera's video breakout box, then routed through a downconverter like the Decimator to display on an onboard monitor.
• Achieving the weight capacity on a standard Flyer requires stripping the Red to essentials: body, prime lens, video breakout device, downconverter, clip-on matte box, and CF card recording, totaling approximately 17-19 pounds.
• Operating significantly over the official weight limit of 15 pounds for a Flyer or 19 pounds for a Flyer LE increases risk of gimbal strain and potential system damage over time.
• Powering multiple accessories like downconverters and follow focus systems from a single Flyer power output creates demand for additional power distribution solutions or custom cables.
• Wireless lens control systems are lighter alternatives to mechanical focus follow systems when mounting a Red on a Flyer.

Depende de

• Runtime estimates for onboard batteries are anecdotal and vary based on specific battery models and what other equipment draws power.
• Weight tolerance discussions reflect operator experience and preference rather than manufacturer specifications; experiences with exceeding limits without immediate failure do not guarantee safety.
• Specific power connector configurations may differ between Flyer and Flyer LE models, requiring verification before attempting connections.
• The Red camera's heat vents are located on the bottom, which could create thermal considerations when mounting additional recording devices or storage directly to the rig.
• Recording solutions such as external raid drives require secure mounting and add weight, which may approach or exceed safe operating limits.

Equipo de este hilo

BFD

Piezas

Follow Focus

Mismo equipo o piezas

1. 2026Tener enfoque y acercarse mientras opera, especialmente en programas en vivoOperator practice
2. 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group
3. 2025Historia de sistemas de enfoque inalámbrico y control de lentes para Steadicam®: desde soluciones digitales basadas en cable Cinema Products y Seitz a Preston y europeas en Chrosziel, cmotion y ARRI.FacebookSteadicam operators group
4. 2025LC-1 (Lens Control-1) sistema follow focus: arquitectura cableada, motores y experiencia operativa temprana (1990s).FacebookThe Steadicam Group