Lo que encontró el hilo

• The Manfrotto MN357 receiver can be mounted to a Pilot stage plate, but the original single screw connection provides insufficient thread engagement for safety.
• Adding a second screw by tapping additional threaded holes in the Manfrotto receiver and filing down the screw heads to clear the stage provides a more secure dual-screw attachment.
• The Manfrotto 577 receiver includes pre-threaded holes in 1/4 BSW and M6 sizes that may be usable for Pilot mounting, though compatibility with Pilot drill patterns should be verified before use.
• Standard Manfrotto quick release plates can be difficult to keep securely tightened during use.

Depende de

• The modifications described were performed on a Manfrotto MN357 and may require different adjustments for other models.
• Whether the pre-threaded holes in the 577 receiver align with Pilot drill patterns was not confirmed in the discussion.
• No recommendations were provided for alternative manufacturers or baseplate models.
• The discussion dates from 2010 and may reference equipment specifications that have since changed.

Piezas

Base Plate

Mismo equipo o piezas

1. 2026Operando un Steadicam® Zephyr sin Volt: drop time, control de horizontes, y el efecto de la distribución de peso de altura sobre balance.DiscutidoFacebookSteadicam operators group
2. 2026Cambie un ARRI ALEXA 35 entre trípode/estudio y Steadicam® montaje: elección de placa base y flujo de trabajo más rápido.FacebookSteadicam operators group
3. 2026Cambie la cámara entre trípode y plataforma: la actualización más barata que la mayoría de los operadores nunca hacenOperator practice
4. 2026Adaptador de cámaras y sistemas de montaje estabilizador para mantener en un kit de operador steadicamGeneral Discussion