2004Foro Follow Focus
Consideraciones de diseño para mangos de control de zoom inalámbrico para sistemas Steadicam
Tiene 22 años. Es posible que el equipo y los precios hayan cambiado desde entonces.
DiscutidoLos participantes no estuvieron de acuerdo y no llegaron a una conclusión. Lee los hallazgos como posturas, no como una respuesta.
Lo que encontró el hilo
- Las soluciones de control de zoom existentes incluyen microfuerza modificada de Preston, sistema BUZ de Bartech, Vocas ZIF-100, Denz DLC-01, y varias demandas de zoom integradas por objetivos de fabricantes como Canon y Fujinon.
- Los operadores que trabajan con sistemas Steadicam necesitan mangos de zoom pequeños, ligeros y fáciles de acceder manteniendo un control de arranque positivo para un momento preciso.
- Pressure-sensitive zoom controls require a learning curve to isolate body motion from thumb pressure, making them challenging to operate during dynamic camera movements.
- Rotating zoom rings with tactile reference points allow operators to lock in consistent speeds by anchoring their thumb between the ring and handle, providing better control during complex movements.
- A wireless zoom solution must be compatible with multiple existing systems including Preston MDR-1 and MDR-2 controllers, as well as various lens motor types from different manufacturers.
- Zoom control devices need to accommodate different connector types across Zeiss, Fuji, and Canon lenses, which have varying physical interfaces and drive specifications.
- On-screen zoom position displays with toggle functionality for layered information could assist operators in verifying precise zoom location without cluttering the viewscreen.
- A universal zoom control should ideally function with both focus and zoom motors, with variable speed control independent of camera settings.
Depende de
- The thread discusses development-stage designs without final specifications or tested performance data.
- Some mentioned systems like Preston's gimbal-mounted zoom control were not fully documented in the thread.
- Multiple incompatible connector and drive standards across lens manufacturers create significant integration challenges.
- Pressure-sensitive control performance varies by individual operator preference and experience level.
Equipo de este hilo
Mismo equipo o piezas
- 2026Pérdida de potencia en Trinity 2 / Artemis 2 con grandes cámaras (A35, Venecia): causas y soluciones de batería.DiscutidoFacebookArri Artemis Trinity
- 2025Controlador de zoom de servo personalizado para Tilta sistema Nucleus con carcasa Bebob Zoe y conector LEMO 7-pinFacebookSteadicam operators group
- 2024Montaje Sony Venice 2 en ARRI Trinity con placa SAM-0: construir configuración y equilibrar estrategias.FacebookArri Artemis Trinity
- 2023Montaje Preston MDR4 motor de enfoque y control de iris Light Ranger en un ALEXA 35 en el ARRI TrinityFacebookArri Artemis Trinity