Lo que encontró el hilo

• Una almohadilla plana con fijación dovetail permite a los operadores PRO 2 sled descansar su plataforma en cajas de equipos entre disparos sin aplicar presión a las baterías.
• El diseño dovetail alberga accesorios estándar como antlers para low-mode trabajo y permite un sistema deslizante de placa de peso para fijar.
• The landing pad mounts to the curved battery rails using three rods and provides a solid connection while allowing Dionic and small Hytron batteries to fit on the front.
• The initial version weighed approximately 20 ounces and could be customized by hollowing out material or adding IDX plate attachments for specific user needs.
• A redesigned version 2.0 was made lighter and smaller with longer side rails to accommodate various battery sizes and different PRO 2 sled versions.
• An alternative approach uses an Anton Bauer hot swap adapter that switches power between batteries sequentially rather than running them in parallel.
• The Anton Bauer hot swap device has built-in electronics that allow only one battery to supply power at a time until exhausted, then automatically switches to the next battery.
• Some operators successfully modified Anton Bauer hot swap units by rewiring them to run two batteries in parallel for increased amperage, though this made the sled wider.

Depende de

• The first production run received feedback that the design was heavier and bulkier than some operators preferred for rigs requiring minimal weight.
• The Anton Bauer approach has design limitations including incompatibility with some battery models due to wireless bracket attachments that protrude from the unit.
• Battery compatibility varies across different PRO 2 sled versions produced over time, requiring design adjustments to the side rail length.
• The parallel battery modification of the Anton Bauer device requires custom rewiring and is not an officially supported configuration.

Piezas

Low Mode

Mismo equipo o piezas

1. 2026Chaleco gotas: lo que baja la toma del brazo realmente compra, y lo que cuesta en la parte superiorOperator practice
2. 2026Low-mode monitor selección para Volt Cerebro rig: rendimiento de latencia de Transvideo Starlite frente a las alternativas actuales.DiscutidoFacebookThe Steadicam Group
3. 2026Conectores Lemo en el ARRI Artemis sled: pinout, verificación de polaridad y potenciación de low-mode monitores y batería Volt.FacebookSteadicam operators group
4. 2026Configuración de Rig para operación de cámara inmersiva de 180 grados con Blackmagic URSA Cine Immersive: minimizar la plataforma y monitorizar la visibilidad en el campo de visión ultra-ancha.FacebookThe Steadicam Group