Lo que encontró el hilo

• The balancing stand does not need to be perfectly level; only the horizontal post matters for balancing the rig, since the rig hangs from the yoke on the balancing pin.
• A rig can be balanced while being worn, and the operator's feet do not need to be on level ground.
• For transport, a built and balanced rig can be placed flat on thick foam rubber in a vehicle for protection.
• When transporting, removing the camera from the rig reduces stress and potential damage; the camera position can be marked with tape and a pencil line for accurate remounting.
• Batteries should be removed from the rig during transport for safety.
• On uneven terrain, the balancing stand can be stabilized by having someone hold it to prevent tipping.
• Digging small holes for the stand legs and using sandbags or soil-filled bags can help achieve near-level positioning in difficult terrain.

Depende de

• The methods described assume access to tools and materials like foam rubber, tape, or digging equipment depending on the transport or location scenario.
• The advice about digging holes and using sandbags is specific to remote wooded locations where such work is practical.
• Wearing the rig while balancing requires operator experience and stability.

Piezas

Top Stage

Mismo equipo o piezas

1. 2026Actualizar un Steadicam® MK-V de más edad con una configuración de 1,5 pulgadas a Volt o cambiar al nuevo puesto de Steadicam® Elite (1,25 pulgadas, 14 kg).FacebookThe Steadicam Group
2. 2026Transvideo ha dejado de negociar: lo que los propietarios de sus monitores necesitan saberOperator practice
3. 2026Betz Herramientas han cambiado de manos a 2eyetec, y lo que significa para partes y servicioOperator practice
4. 2026Prioridades recomendadas de actualización para una plataforma GPI Pro steadicamSteadi-Newbies