Lo que encontró el hilo

• The side-to-side adjustment knob should move with the same ease as the forward-backward adjustment knob.
• Stiff side-to-side adjustment can be resolved by loosening the button head socket screws on the stage top, then re-torquing them gradually while testing the cross shaft for binding.
• If re-torquing the button head screws does not solve the problem, the set screws in the dovetail can be backed off by approximately 1/16 of a turn, then the button heads can be re-tightened while ensuring the dovetail plate has no play.
• Over-tightening the adjustment screws can create excessive play in the dovetail plate and requires careful repositioning to achieve smooth operation.

Depende de

• The specific hex size mentioned (1/8 inch) and screw locations apply to the Flyer camera rig model discussed; compatibility with other models is unclear.
• The procedure requires trial and adjustment to find the correct torque point.
• No technical reason for the initial stiffness was identified in the discussion.

Piezas

Dovetail Plate

Mismo equipo o piezas

1. 2026Apriete una palanca suelta de liberación rápida en la placa Top Stage dovetail, e impidiendo el deslizamiento de la cámara durante el funcionamiento del hombro.DiscutidoFacebookThe Steadicam Group
2. 2026Eliminar la vibración con el ARRI ALEXA 35 en Steadicam®: opciones de montaje rígido para pasar el sistema dovetailFacebookThe Steadicam Group
3. 2026Cambie la cámara entre trípode y plataforma: la actualización más barata que la mayoría de los operadores nunca hacenOperator practice
4. 2026Gestionar las limitaciones de peso al volar cámaras de película de gran formato con lentes anafórficas pesadas en una plataforma SteadicamGeneral Discussion