2009Foro Steadi-Newbies
Distribución de peso y límites de carga para el estabilizador Steadicam Pilot AA
Tiene 17 años. Es posible que el equipo y los precios hayan cambiado desde entonces.
Lo que encontró el hilo
- The 10-pound maximum weight limit for the Pilot AA applies to the camera, battery, accessories, and any added screw-on weights, but does not include the structural weight of the sled itself.
- The Pilot AA battery pack weighs approximately 0.75 pounds.
- Screw-on middle-weights are 0.25 pounds each, while end-weights are 0.125 pounds each.
- Optimal performance is achieved with approximately 2 pounds of weight on the bottom crossbar and 8 pounds on the top stage, which maintains the gimbal position around 2 inches from the stage.
- Placing weights at the ends of the bottom crossbar rather than in the center improves pan smoothness and inertia.
- Excessive weight on the bottom forces the gimbal away from the lens, reducing stability in tilt and roll axes, even if drop time is maintained at 2-3 seconds.
- A tripod adapter makes it easier to mount and remove cameras from the Pilot.
- Using an accurate scale to weigh the complete camera setup including all accessories is essential for proper balancing.
Depende de
- The weight recommendations apply specifically to the Steadicam Pilot AA model.
- The example configuration provided is based on use with a Canon XH-A1 camera weighing 4.5 pounds and may vary with different camera weights.
- Drop time maintenance may conflict with optimal weight distribution for stability.
Piezas
Mismo equipo o piezas
- 2026Actualizar un Steadicam® MK-V de más edad con una configuración de 1,5 pulgadas a Volt o cambiar al nuevo puesto de Steadicam® Elite (1,25 pulgadas, 14 kg).FacebookThe Steadicam Group
- 2026Cambie la cámara entre trípode y plataforma: la actualización más barata que la mayoría de los operadores nunca hacenOperator practice
- 2026Transvideo ha dejado de negociar: lo que los propietarios de sus monitores necesitan saberOperator practice
- 2026Elegir entre actualizar un kit ProVid-2 antiguo o invertir en una plataforma profesional: primer taller frente al primer enfoque del equipo para principiantes.DiscutidoFacebookSteadicam operators group