SteadiHub
2012Forum Sled

GPIPro modul Sled leichtbauleistung und balancierung

14 Jahre alt. Geräte und Preise können sich seitdem geändert haben.

UmstrittenDie Beteiligten waren sich nicht einig. Lies die Befunde als Positionen, nicht als Antwort.

Was die Diskussion ergab

  • Die leichteste GPIPro Sled-Konfiguration wiegt etwa 6,5 Pfund ohne Monitor oder Batterien, wenn eine leichte Basis, ein fester Pfosten, ein Kip-Handgriff Gimbal und DBox 2 verwendet werden.
  • Ein praktisches leichtes Sled-Setup mit Donkey Box Gen II, HD Junction Boxes, Fixed Center Pfosten, Gimbal, Gen IV Batteriegestell, 6-Zoll-Monitor und Preston Fokus-Controller wiegt etwa 11 Pfund ohne Kamera.
  • Das Gen IV Batteriegestell unterstützt sowohl den 12V- als auch den 24V-Betrieb, ist jedoch auf maximal zwei Batterien begrenzt und hat ein niedriges Profil mit einem größeren Einstellbereich als das Gen III Batteriegestell.
  • An Atlas arm combined with this lightweight sled configuration yields approximately 35 pounds total camera capacity.
  • Balancing heavy cameras such as a 26-27 pound Alexa on a lightweight fixed-post sled configuration is problematic and requires either moving weight down below the gimbal or upgrading to an extendable center post.
  • Adding a second battery is more practical than upgrading to an extendable center post when seeking better balance, as the extendable post itself adds weight.
  • The modular junction boxes remain compatible across configurations, allowing users to scale the system up or down based on budget and needs.

Hängt ab von

  • The 35-pound camera capacity figure may be theoretical and difficult to achieve in practice with a fixed-post configuration.
  • Weight estimates are based on user memory and may not be precisely accurate.
  • The comparison between center post types and their specific weight differences is mentioned but not definitively documented.
  • Discussion compares different manufacturers' products with different post diameters, but the practical impact on actual balancing is debated.
  • Example configurations are from 2012 and may not reflect current product specifications.

Geräte in dieser Diskussion

MDR

Bauteile

Donkey Box

Dieselben Geräte oder Bauteile

  1. 2026Leistungsverlust auf Trinity 2 / Artemis 2 mit großen Kameras (A35, Venedig): Ursachen und Batterielösungen.UmstrittenFacebookArri Artemis Trinity
  2. 2025Benutzerdefinierte Servo-Zoom-Steuerung für Tilta Nucleus-System mit Bebob Zoe-Gehäuse und 7-Pin-LEMO-SteckverbinderFacebookSteadicam operators group
  3. 2025Verschärfung des Side-to-Side-Spiels in der Eselbox ARRI Trinity TST-2 Top Stage und Zugriff auf den Ersatzteilkatalog zur Selbstbedienung.UmstrittenSteadiHub
  4. 2025Integration einer Betz Wellenmonitor in einen Steadicam® PRO Sled über feste Bajonettverbinder: Balance Geometrie und Betriebsgewinne.FacebookThe Steadicam Group
Originaldiskussion lesenFrage zu dieser DiskussionDie Antwort nennt ihre Quellen