2006Forum Cameras (Film/Video/HD)
Considérations opérationnelles et problèmes de montage lors de l'utilisation d'une caméra Ikegami HL-55 sur un appareil Steadicam
Il y a 20 ans. Le matériel et les prix ont peut-être changé depuis.
Ce que le fil a révélé
- Le montage de l'objectif sur les caméras Ikegami est plus élevé que celui des modèles Sony ou Panasonic, ce qui peut nécessiter un support de montage spécial pour positionner lens motors à la bonne distance
- Les caméras Ikegami ont une tendance à la sag de viseur lorsque l'anneau de tension interne se détache; enlever le viseur ou le fixer avec du ruban peut empêcher les problèmes d'équilibre
- Powering down the camera before connecting or disconnecting the Triax adapter prevents blowing fuses in the base station
- Ikegami cameras use their own proprietary mounting plate that differs from Sony quick-release plates and cannot be used interchangeably
- The Ikegami mounting plate can develop play over time and may require shimming with tape to maintain a solid connection to the rig
- A monitor output BNC door on the right side of the camera must be opened to enable video feed to external monitors
- Triax connector ports and video connections on older Ikegami units may have reliability issues that should be inspected before use
- The camera is heavier than typical Sony models, which influenced some operators to remove the viewfinder for better balance
Dépend de
- The referenced mounting bracket solution applies specifically to motorized focus systems and may not be relevant for manual focus setups
- Viewfinder sag issues and plate wear are described as experienced problems but their frequency across all HL-55 units is not quantified
- The discussion focuses on experience with the HL-55 and similar HK models from around 2006 and may not reflect current unit conditions
- One operator mentioned using a custom switch box but did not provide detailed specifications or construction details